Construction Tools - Atlas Copco
Construction Tools - Atlas Copco
Construction Tools - Atlas Copco
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Construction</strong> <strong>Tools</strong><br />
Facts book
Welcome to <strong>Atlas</strong> <strong>Copco</strong><br />
<strong>Construction</strong> <strong>Tools</strong><br />
Our name stands for sustainable productivity<br />
An investment in quality is an investment in sustainability<br />
and reliability. Intelligent engineering, top quality materials,<br />
first-class components and modern engines with low fuel<br />
consumption and emissions are the preconditions that<br />
enable us to offer long lasting products with high trade-in<br />
values. To keep things that way and to maximize your<br />
uptime we provide reliable service whenever and wherever<br />
you need it.<br />
At the end of the day, you get the job done with good<br />
results. And in the long run you get less maintenance,<br />
higher efficiency and lower lifecycle costs.<br />
It makes sense to choose lowest lifecycle cost<br />
The total cost of owning equipment over its lifecycle<br />
is largely due to operating costs such as maintenance,<br />
spare parts and energy. Therefore it pays off to choose<br />
<strong>Atlas</strong> <strong>Copco</strong> products. They offer low maintenance, high<br />
performance, long lifetimes and high resale value. This adds<br />
up to lower cost of ownership, even if the initial investment<br />
might be slightly higher.<br />
Ergonomic tool design at its best<br />
Good tool ergonomics also lead to sustainable productivity.<br />
We aim to minimize the physical impact on the operator by<br />
designing tools that are powerful and comfortable to hold,<br />
with low noise, vibration and emission levels.<br />
Low maintenance costs, high availability<br />
Tailor-made maintenance kits, genuine working tools,<br />
accessories and warranty programs. These all help to keep<br />
maintenance costs down and contribute to sustainable<br />
productivity.<br />
2
Valuable support from a global partner<br />
<strong>Atlas</strong> <strong>Copco</strong> <strong>Construction</strong> <strong>Tools</strong>’ global network consists of<br />
more than 60 customer centers and over 1,000 distributors<br />
around the globe. We have the knowledge and experience<br />
to help you choose the best tools for the job – tools that will<br />
keep on working – and we provide you with professional<br />
advice, on-site training, assistance and service. It all adds<br />
up to sustainable productivity.<br />
Latest News:<br />
A full range of light compaction and concrete equipment<br />
To further strengthen our offer for the construction and<br />
rental industry, we lately added a full range of light compaction<br />
and concrete equipment to our product portfolio.<br />
Compaction equipment<br />
• Rammers<br />
• Forward and reversible plates<br />
• Double drum rollers<br />
Concrete equipment<br />
• Trowels<br />
• Screeds<br />
• Pokers<br />
• External vibrators<br />
• Floor saw<br />
For more details please see the chapters<br />
”Compaction Equipment” and ”Concrete Equipment”.<br />
3
<strong>Construction</strong> and Maintenance<br />
4
Demolition and Recycling<br />
6
Open Pit mining and Quarrying<br />
8
Compaction equipment<br />
– expect more<br />
Get the job done faster...<br />
The <strong>Atlas</strong> <strong>Copco</strong> range of compaction equipment will take<br />
your productivity to a whole new level. Outstanding compaction<br />
efficiency – thanks to superior forces and the high<br />
speed of our rammers, plates and rollers – enables you to<br />
get the job done faster and squeeze more into your daily<br />
schedule.<br />
Easier...<br />
Making your workday easier and more productive is<br />
our highest priority. Starting, maneuvering and transportation<br />
of products from our compaction range is<br />
made easy with smart engineering solutions such as the<br />
rammer air breather system, water distribution system<br />
on the forward plates or the compact design of our rollers<br />
with hydraulic transmission. User friendly design and<br />
low hand/arm vibration makes work easier and increase<br />
efficiency further.<br />
And more cost efficient<br />
You need equipment built to last longer; machines with<br />
long service intervals and low life cycle cost. Our innovative<br />
designs come from long experience in the industry,<br />
and from keeping close ties with customers like you in<br />
order to match your needs and increase productivity.<br />
10
11<br />
CompaCtion<br />
equipment
Rammers<br />
Applications:<br />
• Compacting medium to deep layers of<br />
cohesive soils, such as clay or silt but also<br />
sand and gravel<br />
• Repair jobs and in confined areas such as trenches,<br />
around pillars and on housing sites<br />
Advantages:<br />
• High compaction efficiency<br />
• Easy to operate<br />
• Service friendly<br />
• Low maintenance and low fuel consumption<br />
Features:<br />
• Sealed, multi-function tank with throttle control<br />
(Stop/Idle/Run)<br />
• Honda 4-stroke engine with new carburetor<br />
• Patented air breather system for easy start<br />
• Easy access to all daily service points<br />
• Efficient shock absorbers<br />
Rammers LT5004<br />
12<br />
6" 9"<br />
Net mass kg 64 65<br />
Operating mass kg 65 66<br />
Frequency Hz 11 11<br />
Amplitude mm 50-60 50-60<br />
Speed m/min 15-18 15-18<br />
Force/blow kN 10 10<br />
H/A vibrations, standard handle m/s 2 6,4 6,4<br />
Sound power, guaranteed dB(A) 104 104<br />
Sound pressure at operators ear dB(A) 91 91<br />
Dimensions<br />
Plate width mm 150 230<br />
Plate length mm 330 330<br />
LxWxH<br />
Engine<br />
mm 730x395x1015 730x395x1015<br />
Model Honda GX100<br />
Rated power at 3600 rpm kW 2,2<br />
Part number 3382 0000 05 3382 0000 04<br />
Important: Full details of measurement is available in the Safety and Operating Instruction of<br />
the product. It can be found on www.acprintshop.com.
LT6004 LT7000 LT800<br />
9" 11" 11" 11" 13"<br />
73 74 77 83 84<br />
74 75 78 84 85<br />
12 12 12 12 12<br />
65-75 65-75 70-80 75-85 75-85<br />
15-18 15-18 15-18 13-16 13-16<br />
14,8 14,8 18,6 21,4 21,4<br />
4,9 4,9 9,6 12,6 12,6<br />
104 104 107 106 106<br />
91 91 96 96 96<br />
Important: 230 Full details 280 of measurements are 280 available in the Operation 280 & 330<br />
Maintenance Manuals of the product (ID number: ILT6004EN).<br />
It 330 can be found on www.dynapac.com/en/partsandservices/dynadoc/<br />
330 330 330 330<br />
730x395x1060 730x395x1060 730x395x1074 mm 810x422x1074 810x422x1074<br />
Honda GX100 Honda GX120 Hatz 1B20<br />
2,2 2,9 3,4<br />
3382 0000 03 3382 0000 02 3382 0000 52 3382 0000 50 3382 0000 51<br />
13<br />
CompaCtion<br />
equipment
Forward plate compactors<br />
Soil compaction<br />
Applications:<br />
• Compacting thin to medium layers of<br />
granular soils<br />
• Block paving<br />
• Repair jobs and maintenance work such as driveways,<br />
sidewalks and parking lots<br />
Advantages:<br />
• High speed<br />
• Operator comfort<br />
• Easy transportation<br />
• Longer service life<br />
Forward plate compactors LF50 LF60<br />
Operating weight kg 52,5 57,5<br />
Frequency Hz 95 95<br />
Amplitude mm 0,9 0,9<br />
Centrifugal force kN 8,4 10,4<br />
Speed m/min 24 25<br />
H/A vibrations, standard handle m/s2 6,9 7,9<br />
H/A vibrations, vibr reduced handle m/s2 1,8 1,9<br />
Sound power, guaranteed dB(A) 100 100<br />
Sound pressure at operators ear<br />
Dimensions<br />
dB(A) 89 88<br />
Plate width mm 320 350<br />
Plate length mm 505 505<br />
LxWxH<br />
Engine<br />
mm 940x320x965 940x350x965<br />
Model<br />
Honda GX100<br />
SE3 OH<br />
Honda GX100<br />
SE3 OH<br />
Rated power at 3600 rpm kW 2,2 2,2<br />
Part number 3382 0000 32 1) 3382 0000 33 1)<br />
Part number with water tank<br />
Important: Full details of measurement is available in the Safety and Operating Instruction of<br />
the product. It can be found on www.acprintshop.com.<br />
14
Features:<br />
• Specially engineered bottom plate<br />
• Unique vibration-reduced handle<br />
• Removable, 13-liter water tank as option<br />
• Wheels for easy transfer around work sites<br />
• Stowable handle for easy transportation and storage<br />
• Long life V-belt thanks to cooling fan and ventilated<br />
cover<br />
Options:<br />
• Block paving kit (LF75-130)<br />
• Fork lifting device (LF75-100, standard on LF130)<br />
• Water tank. For upgrading soil plates to Soil & Asphalt<br />
versions)<br />
LF80 LF100 LF130<br />
Petrol Diesel Petrol Diesel<br />
82,1 94,9 103,7 134,7 141,0<br />
95 95 95 95 95<br />
1,3 0,9 0,9 0,9 0,9<br />
19 17 17 20 20<br />
34 25 25 22 22<br />
6,7 6,0 9,3 5,4 9,3<br />
1,2 1,3 1,9 1,1 1,9<br />
103 104 104 104 104<br />
91 93 93 93 93<br />
420 500 500 500 500<br />
570 595 595 580 580<br />
960x420x995 960x500x995 960x500x995 960x500x995 960x500x995<br />
HondaGX160 UT1<br />
SXS4 OH<br />
HondaGX160 UT1<br />
SXS4 OH<br />
Hatz 1B20<br />
HondaGX160 UT1<br />
SXS4 OH<br />
Hatz 1B20<br />
4,1 4,1 2,5 4,1 2,5<br />
3382 0000 25 1) 3382 0000 28 1) 3382 0000 30 1) 3382 0000 34 3382 0000 35<br />
3382 0000 26 3382 0000 27 3382 0000 29<br />
1) transport wheels as option<br />
15<br />
CompaCtion<br />
equipment
Forward plate compactors<br />
Asphalt compaction<br />
Applications:<br />
• Asphalt repair and maintenance work<br />
such as driveways, sidewalks and parking lots<br />
• Compacting thin to medium layers of granular soils<br />
• Block paving<br />
Advantages:<br />
• High speed<br />
• Operator comfort<br />
• Easy transportation<br />
• Longer service life<br />
Features:<br />
• Smart water distribution system<br />
• Removable, 13-liter water tank<br />
• Patented vibration-reduced handle<br />
• Specially engineered bottom plate<br />
• Wheels for easy transport around work sites<br />
• Stowable handle for easy transportation and storage<br />
Forward plate compactors LF75<br />
16<br />
420 mm 500 mm<br />
Operating weight kg 91,7 94,5<br />
Frequency Hz 95 95<br />
Amplitude mm 1,0 1,0<br />
Centrifugal force kN 15 15<br />
Speed m/min 27 25<br />
H/A vibrations, standard handle m/s 2 6,0 6,0<br />
H/A vibrations, vibr reduced handle m/s 2 1,2 1,2<br />
Water sprinkler kit l 13 13<br />
Sound power, guaranteed dB(A) 102 102<br />
Sound pressure at operators ear dB(A) 91 91<br />
Dimensions<br />
Plate width mm 420 500<br />
Plate length mm 570 570<br />
LxWxH<br />
Engine<br />
mm 960x420x995 960x500x995<br />
Model HondaGX160 UT1 SXS4 OH<br />
Rated power at 3600 rpm kW 4,1 4,1<br />
Part number 3382 0000 23 3382 0000 21<br />
Part number without water tank 3382 0000 22 1) 3382 0000 24 1)<br />
Important: Full details of measurement is available in the Safety and Operating Instruction<br />
of the product. It can be found on www.acprintshop.com.
LF100<br />
Petrol Petrol. With extra weight Diesel<br />
94,6 107,1 116,1<br />
95 95 95<br />
0,9 0,9 0,9<br />
17 17 17<br />
25 25 25<br />
6,0 6,0 9,3<br />
1,3 1,3 1,9<br />
13 13 13<br />
104 104 104<br />
93 93 93<br />
500 500 500<br />
595 595 595<br />
960x500x995 960x500x995 960x500x995<br />
HondaGX160 UT1 SXS4 OH Hatz 1B20<br />
4,1 4,1 2,5<br />
3382 0000 31 1) 3382 0000 27 3382 0000 29<br />
3382 0000 28 1) 3382 0000 30 1)<br />
1) transport wheels as option<br />
17<br />
CompaCtion<br />
equipment
Long-term investment<br />
in efficiency<br />
High speed and world-class compaction efficiency make<br />
our forward and revisable plates excellent for compacting<br />
medium to deep layers of granular soils in confined areas<br />
such as trenches, parking lots and foundations, etc.<br />
Easy handling in every situation<br />
The high speed, balanced design and hydraulic control<br />
system ensure easy, precise handling on the roughest<br />
of surfaces or for spot compaction. The handle features<br />
a vibration damping design to keep hand/arm vibrations<br />
down for increased operator comfort.<br />
Sustainable value<br />
Extra durable steel in the bottom plate, first-class components<br />
throughout, modern engines with low fuel<br />
consumption and emissions, self-cleaning design and protection<br />
frames around the engine all ensure long-lasting<br />
machines with high trade-in values. At the end of the day,<br />
you get the job done with good results. And in the long<br />
run you get less maintenance, higher efficiency and a<br />
lower life cycle costs.<br />
18
19<br />
CompaCtion<br />
equipment
Forward and reversible<br />
plate compactors<br />
Applications:<br />
• Compacting medium to deep layers of<br />
granular soils<br />
• Confined areas, such as trenches, parking<br />
lots and foundations, etc.<br />
• Block paving<br />
Advantages:<br />
• High compaction efficiency<br />
• Ergonomic and easy to operate<br />
• Durable<br />
• Long service life<br />
• Time saving<br />
Forward and reversible plate compactors LG160<br />
20<br />
Petrol<br />
330 mm 450 mm<br />
Net mass kg 153 160<br />
Operating mass kg 155 161<br />
Frequency Hz 80 80<br />
Amplitude mm 1,4 1,4<br />
Centrifugal force kN 28 28<br />
Speed m/min 22 22<br />
H/A vibrations, standard handle m/s 2 1,5 1,5<br />
Sound power, guaranteed dB(A) 108 108<br />
Sound pressure at operators ear dB(A) 92 92<br />
Dimensions<br />
Plate width mm 330 450<br />
Plate length mm 654 654<br />
LxWxH<br />
Engine<br />
mm 1143x330x1088 1143x450x1088<br />
Model HondaGX160<br />
Rated power at 3600 rpm kW 4,1 4,1<br />
Part number 3382 0000 15 3382 0000 14<br />
Important: Full details of measurement is available in the Safety and Operating Instruction of<br />
the product. It can be found on www.acprintshop.com.
Features:<br />
• Hydraulic forward/reverse lever<br />
• Hardox 400 steel in bottom plate<br />
• Compaction indicator for LG400 (optional)<br />
• Reduced hand/arm vibrations due to design of vibration<br />
damping handle<br />
• Engines with low fuel consumption and emissions<br />
• Heavy-duty protection frame and impact resistant steel<br />
covers protect engine and transmission.<br />
• Straps to secure the joints between bottom plate and<br />
engine.<br />
Options:<br />
• Compaction indicator (LG400)<br />
• Extension plates<br />
• Block paving kits (LG 160-300 and LG500)<br />
• Hour meter (LG500 el and LH700)<br />
• Crank start kit (LG500)<br />
• Transport wheels (LG160-300)<br />
LG160 LG200<br />
Diesel Petrol Diesel<br />
330 mm 450 mm Manual start Electric start<br />
167 174 215 229 245<br />
169 175 217 231 247<br />
80 80 65 65 65<br />
1,4 1,4 1,9 1,9 1,9<br />
28 28 36 36 36<br />
22 22 25 25 25<br />
2,4 2,4 3,5 3,5 3,5<br />
108 108 105 108 108<br />
92 92 90 90 90<br />
330 450 500 500 500<br />
654 654 700 700 700<br />
1143x330x1080 1143x450x1115 1315x500x1065 1355x500x1105 1355x500x1105<br />
Hatz 1B20 Honda GX200 Hatz 1B20 Hatz 1B20<br />
2,8 2,8 4,8 3,1 3,1<br />
3382 0000 13 3382 0000 12 3382 0000 65 3382 0000 66 3382 0000 67<br />
21<br />
CompaCtion<br />
equipment
Forward and reversible plate compactors LG300<br />
22<br />
Petrol<br />
500 mm 600 mm<br />
Net mass kg 263 268<br />
Operating mass kg 265 270<br />
Frequency Hz 68 68<br />
Amplitude mm 1,7 1,7<br />
Centrifugal force kN 40 40<br />
Speed m/min 25 25<br />
H/A vibrations, standard handle m/s 2 2,4 2,4<br />
Sound power, guaranteed dB(A) 108 108<br />
Sound pressure at operators ear dB(A) 92 92<br />
Dimensions<br />
Plate width mm 500 600<br />
Plate length mm 768 768<br />
LxWxH<br />
Engine<br />
mm 1385x500x1120 1385x600x1120<br />
Model Honda GX270<br />
Rated power at 3600 rpm kW 5,8<br />
Part number 3382 0000 39 3382 0000 41<br />
Important: Full details of measurement is available in the Safety and Operating Instruction of<br />
the product. It can be found on www.acprintshop.com.<br />
Forward and reversible plate compactors LG400<br />
Petrol<br />
Net mass kg 396<br />
Operating mass kg 398<br />
Frequency Hz 60<br />
Amplitude mm 1,8<br />
Centrifugal force kN 52<br />
Speed m/min 25<br />
H/A vibrations, standard handle m/s2 2,5<br />
Sound power, guaranteed dB(A) 108<br />
Sound pressure at operators ear<br />
Dimensions<br />
dB(A) 93<br />
Plate width mm 650<br />
Plate length mm 967<br />
LxWxH<br />
Engine<br />
mm 1960x650x1150<br />
Model Honda GX390<br />
Rated power at 3600 rpm kW 7,7<br />
Part number<br />
Part nr with Compaction Indicator<br />
3382 0000 11<br />
Important: Full details of measurement is available in the Safety and Operating Instruction of<br />
the product. It can be found on www.acprintshop.com.
LG300<br />
Diesel<br />
Manual start Electric start<br />
500 mm 600 mm 500 mm 600 mm<br />
280 285 300 305<br />
282 287 302 307<br />
68 68 68 68<br />
1,7 1,7 1,7 1,7<br />
40 40 40 40<br />
25 25 25 25<br />
1,7 1,7 1,7 1,7<br />
108 108 108 108<br />
94 94 94 94<br />
500 600 500 600<br />
768 768 768 768<br />
1385x500x1120 1385x600x1120 1385x500x1120 1385x600x1120<br />
Hatz 1B30<br />
4,2<br />
3382 0000 37 3382 0000 40 3382 0000 38 3382 0000 36<br />
LG400 LG400 (EPA 1 )<br />
Diesel Diesel<br />
Electric start Electric start<br />
434 434<br />
436 436<br />
60 60<br />
1,8 1,8<br />
52 52<br />
25 25<br />
2,1 2,1<br />
108<br />
94,5<br />
650 650<br />
967 967<br />
1960x650x1150 1960x650x1150<br />
Lombardini 15 LD440 Lombardini 15 LD440<br />
6,2 6,4<br />
3382 0000 09 3382 0000 10<br />
3382 0000 06 3382 0000 07<br />
EPA = US Environmental Protection Agency<br />
23<br />
CompaCtion<br />
equipment
Forward and reversible<br />
plate compactors<br />
24<br />
LG500 Diesel LG500 Diesel<br />
Manual start Electric start<br />
550 mm 750 mm 550 mm 750 mm<br />
Net mass kg 487 502 507 522<br />
Operating mass kg 490 505 510 525<br />
Frequency Hz 60 60 60 60<br />
Amplitude mm 2,1 2,1 2,1 2,1<br />
Centrifugal force kN 60 60 60 60<br />
Speed m/min 24 24 24 24<br />
H/A vibrations, std handle m/s2 3,4 3,4 2,1 2,1<br />
Sound power, guaranteed dB(A) 109 109 109 109<br />
Sound pressure at<br />
operators ear<br />
Dimensions<br />
dB(A) 96 96 91 91<br />
Plate width mm 550 750 550 750<br />
Plate length mm 900 900 900 900<br />
LxWxH<br />
Engine<br />
mm<br />
1660x550<br />
x1210<br />
1660x750<br />
x1210<br />
1660x550<br />
x1210<br />
1660x750<br />
x1210<br />
Model Hatz Supra 1D81Z Hatz Supra 1D81Z<br />
Rated power at 3600 rpm kW 8,2 8,2 8,2 8,2<br />
Part number 3382 0000 54 3382 0000 57 3382 0000 55 3382 0000 56<br />
Part number<br />
with extra plate 2x75<br />
3382 0000 63<br />
Part number<br />
with extra plate 2x150<br />
3382 0000 62<br />
Forward and reversible plate compactors LH700 LH800<br />
Diesel Diesel<br />
Electric start<br />
Radio remote<br />
controlled<br />
Net mass kg 777 817<br />
Operating mass kg 780 820<br />
Frequency Hz 53 53<br />
Amplitude mm 2,5 2,5<br />
Centrifugal force kN 95 95<br />
Speed m/min 30 up to 30<br />
H/A vibrations, standard handle m/s2 3,4 -<br />
Sound power, guaranteed dB(A) 109 109<br />
Sound pressure at operators ear<br />
Dimensions<br />
dB(A) 95<br />
Plate width mm 660 660<br />
Plate length mm 1050 1050<br />
LxWxH<br />
Engine<br />
mm 1880x660x1180 1150x660x795<br />
Model Hatz 1D90V Hatz 1D90V<br />
Rated power at 3600 rpm kW 11,0 11,0<br />
Part number 3382 0000 71 3382 0000 72<br />
Important: Full details of measurement is available in the Safety and Operating Instruction of<br />
the product. It can be found on www.acprintshop.com.
Round plate compactor<br />
The LX90 vibratory compactor<br />
features a unique<br />
round base that allows<br />
flush compaction next to<br />
posts, pillars, guardrails,<br />
drainage inlets etc.<br />
Round plate compactor LX90<br />
Net mass kg 95<br />
Operating mass kg 96<br />
Frequency Hz 75<br />
Amplitude mm 1,7<br />
Centrifugal force kN 16<br />
Speed m/min 22<br />
H/A vibrations, standard handle m/s 2 6,1<br />
Sound power, guaranteed dB(A) 104<br />
Sound pressure at operators ear dB(A) 92<br />
Dimensions<br />
Plate diameter mm 450<br />
Height<br />
Engine<br />
mm 920<br />
Model HondaGX160<br />
Rated power at 3600 rpm kW 4,0<br />
Part number 3382 0000 53<br />
Important: Full details of measurement is available in the Safety and Operating Instruction of<br />
the product. It can be found on www.acprintshop.com.<br />
25<br />
CompaCtion<br />
equipment
Duplex roller<br />
Applications:<br />
• Compacting thin layers of granular<br />
soils, wet sand and asphalt.<br />
• Jobs in confined areas, parking lots, repair works etc.<br />
Advantages:<br />
• High efficiency<br />
• Reliable<br />
• Long life<br />
• Easy to operate<br />
Features:<br />
• Fully hydraulic<br />
• Large, removable water tank<br />
• Built-in oil cooler for increased lifetime of vital<br />
components<br />
• Heavy-duty protection frame with single lifting<br />
point for easy transportation<br />
• Minimum overhang and high curb clearance<br />
• Powerful engine for reliable operations.<br />
Duplex roller<br />
Net mass kg<br />
Operating mass kg<br />
Frequency Hz<br />
Amplitude mm<br />
Centrifugal force kN<br />
Speed, forward/reverse km/h<br />
H/A vibrations, standard handle m/s 2<br />
Sound power, guaranteed dB(A)<br />
Sound pressure at operators ear dB(A)<br />
Dimensions<br />
Drum diameter mm<br />
Drum width mm<br />
LxWxH mm<br />
Engine<br />
Model<br />
Rated power, at 2600 rpm kW<br />
Part number<br />
Important: Full details of measurement is available in the Safety and Operating Instruction of<br />
the product. It can be found on www.acprintshop.com.<br />
26
LP6500 LP750<br />
Diesel Diesel<br />
Manual start Electric start Manual start Electric start<br />
658 678 953 979<br />
696 716 993 1009<br />
61 61 63 63<br />
0,45 0,45 0,5 0,5<br />
21 21 25 25<br />
0-3,6/0-2,3 0-3,6/0-2,3 3,6 3,6<br />
4,3 4,0 4,0 4,0<br />
107 107 109 109<br />
90 90 90 90<br />
400 400 500 500<br />
650 650 750 750<br />
1100/2551x714x1045 1100/2551x714x1045 1372/2640x880x1283 1372/2640x880x1283<br />
Hatz 1D50S Hatz Supra 1D81S<br />
6,8 6,8 8,9 8,9<br />
3382 0000 01 3382 0000 00 3382 0000 78 3382 0000 79<br />
27<br />
CompaCtion<br />
equipment
trench compactor<br />
With its superior traction the LP8504<br />
makes work on cohesive and granular soils easy, even if<br />
the work site is confined or packed with obstacles. The<br />
trench compactor is suitable for backfills, foundations,<br />
parking lots and similar applications.<br />
Applications:<br />
• Compacting medium to<br />
deep layers of cohesive<br />
and granular soils<br />
• Jobs in confined areas<br />
such as trenches, construction<br />
back-fills and<br />
roads<br />
Advantages:<br />
• Remote control<br />
Trench compactor LP8504<br />
28<br />
• Reliable and robust<br />
• Easy and safe for the<br />
operator<br />
• Excellent traction<br />
Features:<br />
• Bluetooth remote control<br />
• Oil cooler<br />
• Efficient drum pad design<br />
• No overhang<br />
Diesel<br />
630 mm 850 mm<br />
Net mass kg 1548 1650<br />
Operating mass kg 1573 1675<br />
Frequency Hz 32 32<br />
Amplitude mm 1,1 1,1<br />
Centrifugal force kN 65 65<br />
Speed, working/transport m/min 21 39<br />
H/A vibrations, standard<br />
handle<br />
m/s2 - -<br />
Sound power, guaranteed dB(A) 106 106<br />
Sound pressure at operators<br />
ear<br />
Dimensions<br />
dB(A) - -<br />
Drum diameter mm 535 630<br />
Drum width mm 630 850<br />
LxWxH<br />
Engine<br />
mm 1875x630x1207 1875x850x1207<br />
Model Hatz 2G40<br />
Rated power at 2400 rpm kW 12,5 12,5<br />
Part number 3382 0000 81 3382 0000 80<br />
Important: Full details of measurement is available in the Safety and Operating Instruction<br />
of the product. It can be found on www.acprintshop.com.
29<br />
CompaCtion<br />
equipment
Compaction<br />
capacity on asphalt<br />
Machine Width Speed Surface capacity<br />
Machine Width Passes Speed Rockfill Gravel/Sand<br />
30<br />
mm m/min m 2 /h<br />
Passes<br />
2 4<br />
LF75 420 27 240 120<br />
LF75 500 24 252 126<br />
LF80 420 34 300 150<br />
LF100 500 25 262 131<br />
Efficiency factor 0,7.<br />
Compaction capacity on soil<br />
mm m/min m 1) m 3 /h m 1) m 3 /h<br />
LF50 320 4 25 0,2 24<br />
LF60 350 4 26 0,2 27<br />
LF75 420 4 27 0,2 34<br />
LF75 500 4 24 0,2 36<br />
LF80 420 4 34 0,2 43<br />
LF100 500 4 25 0,2 37<br />
LF130 500 4 22 0,25 41<br />
LX90 450 4 20 0,25 35<br />
LG160 450 4 22 0,3 45<br />
LG200 500 4 22 0,3 50<br />
LG300 500 4 22 0,35 60<br />
LG400 650 4 25 0,6 146 0,4 98<br />
LG500 750 4 22 0,6 150 0,4 100<br />
LH700 660 4 30 0,8 240 0,45 130<br />
LH800 660 4 25 0,8 200 0,45 110<br />
LT5004 230 4 15 0,4 20<br />
LT6004 280 4 15 0,4 25<br />
LT7000 280 4 15 0,4 25<br />
LT800 280 4 15 0,4 25<br />
LP6500 650 8 50 0,15 35<br />
LP750 750 8 60 0,2 70<br />
LP8504 850 8 40 0,4 100<br />
1) Max recommended layer thickness<br />
Efficiency factor 1,0. Multiply the capacity above with your efficiency factor, within 0-1,0.
Machine Width Speed Surface capacity<br />
mm m/min m2 /h<br />
Passes<br />
2 4 6<br />
LP6500 650 50 375 250 200<br />
LP750 750 60 475 325 240<br />
Silt Clay Subbase Base<br />
m 1) m 3 /h m 1) m 3 /h m 1) m 3 /h m 1) m 3 /h<br />
0,1 12 0,1 12 0,1 12<br />
0,1 14 0,1 14 0,1 14<br />
0,1 17 0,15 25 0,1 17<br />
0,1 18 0,1 18 0,1 18<br />
0,1 21 0,15 32 0,1 21<br />
0,1 19 0,15 28 0,1 19<br />
0,15 25 0,15 25 0,15 25<br />
0,15 20 0,2 25 0,15 20<br />
0,2 30 0,2 30 0,2 30<br />
0,2 35 0,2 35 0,2 35<br />
0,2 35 0,25 40 0,2 35<br />
0,25 60 0,3 73 0,25 60<br />
0,3 75 0,3 75 0,25 60<br />
0,3 90 0,35 100 0,3 90<br />
0,3 75 0,35 85 0,3 75<br />
0,3 15 0,2 10 0,35 20 0,3 15<br />
0,3 20 0,2 15 0,35 20 0,3 20<br />
0,3 20 0,2 15 0,35 20 0,3 20<br />
0,3 20 0,2 15 0,35 20 0,3 20<br />
0,2 50 0,15 35<br />
0,2 70 0,2 70<br />
0,3 75 0,1 25 0,3 75 0,25 65<br />
31<br />
CompaCtion<br />
equipment
Pokers<br />
Good vibrations at your service<br />
<strong>Atlas</strong> <strong>Copco</strong> offers efficient and reliable high quality<br />
pokers with long service life. The high speed, rapid acceleration<br />
and high amplitude of our pokers will help you<br />
increase productivity.<br />
Plenty of reasons to go electric<br />
The high power, stable speed and high centrifugal force<br />
of our electronic and electric pokers provide a wide radius<br />
of action and rapid acceleration to effectively remove air<br />
voids from the concrete. There are also other efficiency<br />
gains, like the absence of startup time when using the<br />
Smart series of pokers with built-in frequency converters<br />
– just plug one into a regular wall socket and start<br />
working – or the fact that one frequency converter can<br />
run up to four pokers. It is also much easier to extend<br />
a cable than a flexible shaft. The electric motor-in-head<br />
solution helps keep vibrations where they belong – in the<br />
concrete rather than your hands and arms, making the<br />
electric poker your efficient and user-friendly option.<br />
Mechanical pokers – Quality components, robust<br />
design<br />
Assembled from high-quality components such as<br />
induction-hardened magnesium steel alloy in the major<br />
wearing parts and steel reinforcement in the rubber hose.<br />
To keep up speed and prevent rpm-losses the pendulum<br />
raceway has a conical shape for better friction within the<br />
poker head. The simple design makes service easy and<br />
inexpensive. Available with a selection of drive units to<br />
suit most work sites.<br />
Pneumatic Pokers – Clean and cool in all sizes<br />
An economical alternative, especially if an air compressor<br />
is already at the work site. Few moving parts means long<br />
service life and reduced hand/arm vibration. Highly resistant<br />
pre-treated tubes ensure long life. Excellent for walls<br />
and columns since the series is air-cooled.<br />
32
33<br />
concrete<br />
equiPment
electronic pokers<br />
Thanks to the built-in frequency converter all you need to<br />
start working is a regular wall socket. The design with the<br />
electric motor placed in the poker head gives outstanding<br />
performance with high power and stable speed.<br />
Features:<br />
• Cable in the hose<br />
• 20 m reach around the plug<br />
• High protection level<br />
Electronic Pokers<br />
SMART<br />
SMART SMART40 SMART48 SMART56 SMART65<br />
Tube diameter mm 40 48 56 65<br />
Tube length mm 320 350 380 410<br />
Hose length m 5 5 5 5<br />
Vibration value m/s 2 3,7 4,33 4,47 4,24<br />
Noise level dB(A) 78 76 79 79<br />
Part number<br />
230V-1-50/60Hz 4812 0508 52 4812 0508 53 4812 0508 54 4812 0508 55<br />
110V-1-50/60Hz UK 4812 0508 56 4812 0508 57 4812 0508 58<br />
110V-1-50/60Hz Canada 4812 0508 59 4812 0508 60 4812 0508 61<br />
All SMART pokers<br />
Cable length m 15<br />
Frequency vpm 12000<br />
Primary voltage (V)±10% V/Hz 230-1-50/60 or 110-1-50/60<br />
Converter dimensions LxWxH 300x100x80<br />
Important: Full details of measurement is available in the Safety and Operating Instruction of<br />
the product. It can be found on www.acprintshop.com.<br />
34
Electronic Pokers<br />
SMART-E<br />
Devibrated handle<br />
SMART SMART E28 SMART E40 SMART E48 SMART E56<br />
Tube diameter mm 28/40 40 48 56<br />
Tube length mm 239/211 320 350 380<br />
Hose length m 0,5 0,5 0,5 0,5<br />
Vibration value m/s 2 0,52 0,52 0,55 0,53<br />
Noise level dB(A) 78 78 76 79<br />
Part number<br />
230V-1-50/60Hz 4812 0508 62 4812 0508 63 4812 0508 64 4812 0508 65<br />
All SMART-E pokers<br />
Cable length m 15<br />
Frequency vpm 12000<br />
Primary voltage (V)±10% V/Hz 230-1-50/60<br />
Converter dimensions LxWxH 300x100x80<br />
Important: Full details of measurement is available in the Safety and Operating Instruction of<br />
the product. It can be found on www.acprintshop.com.<br />
35<br />
concrete<br />
equiPment
electric pokers<br />
Designed to handle low slump concrete the AN series<br />
of electric pokers features massive centrifugal force and<br />
amplitude. Radius of action is 10 times the poker diameter.<br />
For medium to high slump concrete the AX series is<br />
a good alternative.<br />
Features:<br />
• Thermo switches<br />
• 20 m reach around the plug<br />
• Low voltage 42V-3-200Hz<br />
AN Pokers<br />
Electric Poker<br />
Vibrators<br />
AN Pokers AN40 AN48 AN56 AN65 AN90<br />
Tube diameter mm 40 48 56 65 90<br />
Tube length mm 320 350 380 410 566<br />
Tube weight kg 2,3 4,2 5,2 7,9 18<br />
Ampere at 42V A 5 11 13,5 21 21<br />
Vibration value m/s2 3,7 4,33 4,47 4,24 5<br />
Noise level dB(A) 78 76 79 79 76<br />
Part number 4812 0508 454812 0508 464812 0508 474812 0508 484812 0508 79<br />
All AN pokers<br />
Cable length m 15<br />
Frequency vpm 12000<br />
Voltage V/Hz 42-3-200<br />
Important: Full details of measurement is available in the Safety and Operating Instruction of<br />
the product. It can be found on www.acprintshop.com.<br />
36
AN-E Pokers<br />
Electric Poker Vibrators<br />
Devibrated handle<br />
AN-E Pokers AN28E AN40E AN48E AN56E<br />
Tube diameter mm 28/40 40 48 56<br />
Tube length mm 239/211 320 350 380<br />
Tube weight kg 2,4 2,1 4,1 5,1<br />
Hose length m 0,5 0,5 0,5 0,5<br />
Cable length m 15 15 15 15<br />
Frequency vpm 12000 12000 12000 12000<br />
Voltage V/Hz 42-3-200 42-3-200 42-3-200 42-3-200<br />
Ampere at 42V A 4 5 11 13,7<br />
Vibration value m/s 2 0,52 0,51 0,61 0,96<br />
Noise level dB(A) 78 78 76 79<br />
Part number 4812 0508 44 4812 0508 93 4812 0508 94 4812 0508 95<br />
Important: Full details of measurement is available in the Safety and Operating Instruction of<br />
the product. It can be found on www.acprintshop.com.<br />
AX Pokers<br />
Electric Poker Vibrators<br />
AX Pokers AX36 AX40 AX48 AX56 AX65<br />
Tube diameter mm 36 40 48 56 65<br />
Tube length mm 322 320 350 380 410<br />
Tube weight m 2,1 2,1 4,1 5,1 7,7<br />
Cable length m 10 10 10 10 10<br />
Voltage V/Hz 42-3-200 42-3-200 42-3-200 42-3-200 42-3-200<br />
Frequency vpm 12000 12000 12000 12000 12000<br />
Ampere at 42V A 6,2 4,5 10 11,7 19<br />
Vibration value m/s2 3,9 3,5 2,26 4,38 4,11<br />
Noise level dB(A) 70 78 76 79 79<br />
Part number 4812 0508 27 4812 0508 28 4812 0508 29 4812 0508 30 4812 0508 31<br />
Important: Full details of measurement is available in the Safety and Operating Instruction<br />
of the product. It can be found on www.acprintshop.com.<br />
37<br />
concrete<br />
equiPment
AX-C Pokers<br />
Electric Poker Vibrators<br />
Rigid cane<br />
AX-C Pokers AX36C AX40C AX48C AX56C<br />
Tube diameter mm 36 40 48 56<br />
Tube length mm 322 320 350 380<br />
Tube weight m 2,1 2,1 4,1 5,1<br />
Frequency vpm 12000 12000 12000 12000<br />
Voltage V 42V-3-200 Hz 42V-3-200 Hz 42V-3-200 Hz 42V-3-200 Hz<br />
Ampere at 42V A 6,2 4,5 10 11,7<br />
Vibration value m/s2 2,1 3,81 3,53 3,66<br />
Noise level<br />
Part number<br />
dB(A) 78 76 79<br />
Cane 500 mm 4812 0508 32 4812 0508 33 4812 0508 34 4812 0508 35<br />
Cane 1000 mm 4812 0508 36 4812 0508 37 4812 0508 38 4812 0508 39<br />
AXE Pokers<br />
Electric Poker Vibrators<br />
Devibrated handles<br />
AXE Pokers AX40E AX48E AX56E<br />
Tube diameter mm 40 48 56<br />
Tube length mm 320 350 380<br />
Tube weight m 2,1 4,1 5,1<br />
Frequency vpm 12000 12000 12000<br />
Ampere at 42V A 4,5 10 11,5<br />
Vibration value m/s 2 0,51 0,61 0,96<br />
Noise level dB(A) 78 76 79<br />
Part number 4812 0508 40 4812 0508 41 4812 0508 42<br />
AXP Pokers<br />
AXAU Pokers<br />
Electric Poker Vibrators<br />
Paver (P) and Slipring (AU) versions<br />
AXP/AXAU Pokers AX65P AX48AU<br />
Tube diameter mm 65 52<br />
Tube length mm 410 350<br />
Tube weight m 7,7 4,1<br />
Frequency vpm 12000 12000<br />
Voltage V 42V-3-200 Hz 42V-3-200 Hz<br />
Ampere at 42V A 19 10<br />
Noise level dB(A) 79 76<br />
Part number 4812 0508 43 4812 0508 80<br />
Important: Full details of measurement is available in the Safety and Operating Instruction of<br />
the product. It can be found on www.acprintshop.com.<br />
38
Vibrastar pokers<br />
Reliable and robust poker<br />
designed for medium to<br />
high slump concrete. To save<br />
you both time and money<br />
the Vibrastar is as efficient<br />
when it comes to concrete<br />
vibration as it is on energy<br />
consumption.<br />
Features:<br />
• No need of compressor<br />
• Easy to handle switch box<br />
• Low voltage 42V-3-200Hz<br />
Vibrastar Pokers<br />
Electric Poker Vibrators<br />
Devibrated handles<br />
Vibrastar Pokers Vibrastar 40 Vibrastar 50 Vibrastar 60<br />
Tube diameter mm 40 48 60<br />
Tube length mm 255 284 330<br />
Tube weight m 1,84 3,06 5,1<br />
Frequency vpm 12000 12000 12000<br />
Ampere at 42V A 4 8 11<br />
Vibration value m/s2 1,8 3,28 3,23<br />
Noise level dB(A) 86 87 95<br />
Part number 4812 0508 49 4812 0508 50 4812 0508 51<br />
Important: Full details of measurement is available in the Safety and Operating Instruction of<br />
the product. It can be found on www.acprintshop.com.<br />
39<br />
concrete<br />
equiPment
Frequency<br />
converters<br />
The electric frequency converter can<br />
supply several pokers with power at<br />
the same time. No fumes, less noise<br />
and low weight are other appreciated<br />
properties, as well as the stable<br />
power output without any variation.<br />
Features:<br />
• Stable frequency and speed<br />
• Up to four outlets<br />
• Low weight<br />
Frequency Converters CF11 CF25 CF67<br />
Power kVA 0,8 1,8 4,7<br />
Output intensity av 42 V A 11 25 67<br />
Number of phases<br />
(primary voltage)<br />
1 1/3 3<br />
Number of outlets 1 2 4<br />
Weight kg 18 31 70<br />
Protection index IP55 IP55 IP55<br />
Noise level<br />
Part number<br />
dB(A) 67 69 73<br />
230V-1-50Hz 4812 0503 95 4812 0503 94 -<br />
400V-3-50Hz - 4812 0503 93 4812 0510 51<br />
440V-3-50Hz - 4812 0504 74 4812 0510 52<br />
380V-3-60Hz - 4812 0510 80 4812 0510 78<br />
400V-3-50Hz C14P - - 4812 0510 53<br />
440V-3-50Hz C14P - - 4812 0510 54<br />
380V-3-60Hz C14P - - 4812 0510 79<br />
40
acoon pokers<br />
Extremely versatile vibration system<br />
with one ”carry-on” two horsepower electric drive unit to<br />
be combined with 4 poker heads and 5 flexible shafts.<br />
Features:<br />
• High speed<br />
• High power<br />
• Flexible shafts<br />
AT Pokers AT29 AT39 AT49 AT59<br />
Tube diameter mm 29 39 49 59<br />
Tube length mm 332 315 311 306<br />
Tube weight kg 1,3 2,1 2,7 3,9<br />
Frequency vpm 12000 12000 12000 12000<br />
Vibration value m/s 2 5,56 6,22 8,02 10,42<br />
Noise level dB(A) 75 75 84 84<br />
Part number 4812 0508 05 4812 0508 06 4812 0508 07 4812 0508 08<br />
Drive units Racoon<br />
Energy Electric<br />
Input hp 2<br />
Speed rpm 12000<br />
Weight kg 5<br />
Vibration value m/s 2 2,5<br />
Noise level dB(A) 84,5<br />
Part number<br />
110V-1-50/60 Hz CSA 4812 0508 71<br />
110V-1-50/60 Hz UK 4812 0508 70<br />
230V-1-50/60 Hz 4812 0508 69<br />
Flexible<br />
shafts<br />
Superflex<br />
10<br />
Superflex<br />
15<br />
Superflex<br />
20<br />
Superflex<br />
30<br />
Superflex<br />
40<br />
Length m 1,0 1,5 2,0 3,0 4,0<br />
Part number 4812 0508 13 4812 0508 14 4812 0508 15 4812 0508 16 4812 0508 17<br />
Important: Full details of measurement is available in the Safety and Operating Instruction of<br />
the product. It can be found on www.acprintshop.com.<br />
41<br />
concrete<br />
equiPment
mechanical pokers<br />
Reliable, easy-to-use and very versatile pokers. Available<br />
with a wide selection of drive units to suit most working<br />
sites. The product is built up with high quality components.<br />
The simple design makes service easy and affordable.<br />
Features:<br />
• Conical shaped pendulum raceway<br />
• High speed<br />
• Long hose<br />
• Simple design – easy to dismantle<br />
AA Pokers AA27 AA37 AA47 AA67 AA77<br />
Tube diameter mm 25 39 49 63 75<br />
Tube length mm 335 385 440 480 500<br />
Tube weight kg 0,9 2,1 4,0 6,8 9,0<br />
Frequency vpm 12000 12000 11200 10500 9200<br />
Vibration value m/s2 2,46 4,02 3,52 2,66 3,89<br />
Noise level dB(A) 69 68 73 75,8 75,7<br />
Part number 4812 0508 00 4812 0508 01 4812 0508 02 4812 0508 03 4812 0508 04<br />
AZ Pokers AZ26 AZ36 AZ46 AZ56<br />
Tube diameter mm 25 35 45 55<br />
Tube length mm 295 330 375 390<br />
Tube weight kg 0,5 1,8 1,9 2,0<br />
Frequency vpm 12000 12000 12000 11300<br />
Vibration value m/s2 2,00 5,22 6,86 8,27<br />
Noise level dB(A) 77,50 82,00 87,4 90,00<br />
Part number 4812 0508 09 4812 0508 10 4812 0508 11 4812 0508 12<br />
Important: Full details of measurement is available in the Safety and Operating Instruction of<br />
the product. It can be found on www.acprintshop.com.<br />
42
Drive units<br />
<strong>Atlas</strong> <strong>Copco</strong> offers a wide range of drive units with gasoline,<br />
diesel and electric options. Electric motors feature<br />
strong casings, great internal shock absorption and built<br />
in flywheel to prevent the three-phase motors from running<br />
in the wrong direction.<br />
Features:<br />
• Low fuel consumption<br />
• Strong casings<br />
Drive units<br />
AM15,<br />
Lombardini<br />
AM18,<br />
Honda<br />
AF21 AG21<br />
Energy Diesel Petrol Electric Electric<br />
Power kW 3,0 3,2 1,3 1,1<br />
Speed rpm 2900 2900 2850 2850<br />
Vibration value kg 46 23 18,5 21<br />
Noise level dB(A) 79 72,8 72,5 74,5<br />
Part number 4812050875 4812050876 - -<br />
110V-1-50/60Hz - - - 4812050868<br />
230V-1-50/60Hz - - - 4812050867<br />
230/400V-3-50/60Hz - - 4812050866<br />
Important: Full details of measurement is available in the Safety and Operating Instruction of<br />
the product. It can be found on www.acprintshop.com.<br />
43<br />
concrete<br />
equiPment
Pneumatic pokers<br />
An environmentally friendly and<br />
economical alternative if an air<br />
compressor is already at the work site.<br />
Few moving parts for long service life.<br />
Features:<br />
• No moving parts in the hose<br />
• Cooled by the compressed air.<br />
• One compressor can drive several pokers.<br />
AY Pokers AY27 AY37 AY47 AY57<br />
Tube diameter mm 26 36 47 56<br />
Tube length mm 254 267 316 344<br />
Tube weight kg 0,7 1,5 2,8 4,5<br />
Frequency vpm 12000 12000 12000 12000<br />
Vibration value m/s2 0,19 1,02 2,39 2,87<br />
Noise level<br />
Part number<br />
dB(A) 84,5 89,2 95,8 95,0<br />
Hose length 2 m 4812 0508 18 4812 0508 19 4812 0508 20 4812 0508 21<br />
Hose length 4 m 4812 0508 81 4812 0508 83 4812 0508 85 4812 0508 87<br />
Hose length 6 m 4812 0508 82 4812 0508 84 4812 0508 86 4812 0508 88<br />
Important: Full details of measurement is available in the Safety and Operating Instruction of<br />
the product. It can be found on www.acprintshop.com.<br />
44
AY Pokers AY67 AY77 AY87 AY107 AY157<br />
Tube diameter mm 67 77 87 108 155<br />
Tube length mm 365 398 410 415 430<br />
Tube weight kg 7,9 8,9 9,7 17,7 28<br />
Frequency vpm 12000 12000 12000 12000 12000<br />
Hose length m - - 1,5 1,5 0,8<br />
Vibration value m/s 2 1,28 4,9 1,95 2,91 12,29<br />
Noise level dB(A) 98,0 98,0 94,0 96,3 92,4<br />
Part number 4812 0508 24 4812 0508 25 4812 0508 26<br />
2 m 4812 0508 22 4812 0508 23<br />
4 m 4812 0508 89 4812 0508 91<br />
6 m 4812 0508 90 4812 0508 92<br />
Important: Full details of measurement is available in the Safety and Operating Instruction of<br />
the product. It can be found on www.acprintshop.com.<br />
45<br />
concrete<br />
equiPment
external vibrators<br />
To meet your external vibration requirements <strong>Atlas</strong><br />
<strong>Copco</strong> offers a wide range of vibrators, from high<br />
speed pneumatic to normal frequency electric – all<br />
with adjustable centrifugal force. In addition to reliable<br />
equipment we also provide our customers with more<br />
than 50 years of experience from this field.<br />
Cost effective<br />
Good concrete vibration and excellent results thanks<br />
to flexible, high centrifugal force. In order to increase<br />
flexibility and cost efficiency, ER207B, ER407B and<br />
ER507B vibrators are mounted on quick release brackets<br />
for easy portability, thus fewer units are required. Highend<br />
components and materials keep life cycle and<br />
maintenance costs down.<br />
46
To cover your need of external vibration <strong>Atlas</strong> <strong>Copco</strong> offer<br />
a wide range of equipment, from high speed pneumatic<br />
to normal frequency electric vibrators – all with adjustable<br />
centrifugal force.<br />
Features: 1)<br />
• Integrated noise reducer<br />
• Adjustable bracket mounting<br />
• Adjustable centrifugal force<br />
ER<br />
Electric External Vibrators<br />
High speed 6000 rpm<br />
ER207B ER407B ER507B<br />
Max centrifugal force N 7 400 11000 16000 N<br />
Voltage Hz 42V-3-200 42V-3-200 2) 42V-3-200<br />
Intensity A 12,5 16,5 23,5<br />
Weight kg 10,5 15,5 23,2<br />
Bracket attachment VT2 VT4 VT4<br />
Noise level<br />
Part number<br />
dB(A) 69 84,5 85<br />
42V-3-200Hz 4812 0509 80 4812 0509 81 4812 0509 82<br />
250V-3-200Hz 4812 0509 84<br />
Bracket 4700 1025 69 4700 1019 70 4700 1019 70<br />
Extension cord table<br />
For ER (6000 rpm) and Pokers (AX/AN/Vibrastar)<br />
Length 5 m 10 m 15 m 20 m<br />
Part number 4700 1814 13 4700 1814 14 4700 1814 15 4700 1814 16<br />
Important: Full details of measurement is available in the Safety and Operating Instruction of<br />
the product. It can be found on www.acprintshop.com.<br />
1) varies between the different models<br />
2) 250 V available upon request<br />
47<br />
concrete<br />
equiPment
ER<br />
Electric External Vibrators<br />
Normal speed 3000 rpm<br />
ER105 ER205 ER305 ER405<br />
Max centrifugal force N 500 1400 3000 6000<br />
Intensity at 230/400V A 0,16/0,09 0,3/0,18 0,7/0,4 1,8/1,09<br />
Weight kg 2,7 4,3 11 20<br />
Noise level dB(A) 55 56 57 57<br />
Part number 4812 0509 10 4812 0509 20 4812 0509 30 4812 0509 40<br />
Bracket 4700 1857 71<br />
ER505 ER605 ER705<br />
Max centrifugal force N 8000 12000 N 16000 N<br />
Intensity at 230/400V () A 2,2/1,3 3,3/1,9 4,2/2,5<br />
Weight kg 22 44,6 kg 46,8 kg<br />
Noise level dB(A) 57 61 dB(A) 63 dB(A)<br />
Part number 4812 0509 50 4812 0509 60 4812 0509 70<br />
Bracket 4700 4857 71<br />
Standard Voltage 230/400V-3-50 Hz. Other voltages upon request.<br />
Important: Full details of measurement is available in the Safety and Operating Instruction of<br />
the product. It can be found on www.acprintshop.com.<br />
EP<br />
Pneumatic Vibrators, High speed<br />
EP121B EP271B EP371B EP601B<br />
Speed rpm 9000 9350 rpm 9350 rpm 8800 rpm<br />
Max centrifugal force N 8100 10350 N 26800 N 31500 N<br />
Air consumption l/min 1200 1200 l/min 1400 l/min 1400 l/min<br />
Weight kg 9,5 10 kg 16,5 kg 18 kg<br />
Bracket attachment VT2 VT2 VT4 VT4<br />
Noise level dB(A) 90 90,8 dB(A) 95 dB(A) 100 dB(A)<br />
Part number 4812 0509 86 4812 0509 87 4812 0509 88 4812 0509 89<br />
Bracket 4700 1025 69 4700 1025 69 4700 1019 70 4700 1019 70<br />
Important: Full details of measurement is available in the Safety and Operating Instruction<br />
of the product. It can be found on www.acprintshop.com.<br />
48
EB<br />
Ball Vibrators<br />
EB10, at 2 bar – 29 psi 4 bar – 60 psi<br />
Speed rpm 20000 22000<br />
Centrifugal force N 228 273<br />
Air consumption l/min 112 168<br />
Noise level dB(A) 74 74<br />
Part number 4700 3652 86 4700 3652 86<br />
EB13, at 2 bar – 29 psi 4 bar – 60 psi<br />
Speed rpm 16000 18000<br />
Centrifugal force N 303 383<br />
Air consumption l/min 112 168<br />
Noise level dB(A) 74 74<br />
Part number 4700 3652 87 4700 3652 87<br />
EB19, at 2 bar – 29 psi 4 bar – 60 psi 6 bar – 87 psi<br />
Speed rpm 11000 13000 14000<br />
Centrifugal force N 1 232 1 716 1 980<br />
Air consumption l/min 196 308 420<br />
Noise level dB(A) 76 76 76<br />
Part number 4700 3652 88 4700 3652 88 4700 3652 88<br />
EB25, at 2 bar – 29 psi 4 bar – 60 psi 6 bar – 87 psi<br />
Speed rpm 10000 11000 11900<br />
Centrifugal force N 1 628 1 980 2 376<br />
Air consumption l/min 280 392 504<br />
Noise level dB(A) 77 77 77<br />
Part number 4700 3652 89 4700 3652 89 4700 3652 89<br />
EB35, at 2 bar – 29 psi 4 bar – 60 psi 6 bar – 87 psi<br />
Speed rpm 7600 8200 8800<br />
Centrifugal force N 2596 3080 3564<br />
Air consumption l/min 392 504 616<br />
Noise level dB(A) 79 79 79<br />
Part number 4700 3652 90 4700 3652 90 4700 3652 90<br />
EB41, at 2 bar – 29 psi 6 bar - 87 psi 4 bar – 60 psi<br />
Speed rpm 5000 6500 7000<br />
Centrifugal force N 2332 4004 4620<br />
Air consumption l/min 420 560 728<br />
Noise level dB(A) 81 81 81<br />
Part number 4700 3652 91 4700 3652 91 4700 3652 91<br />
49<br />
concrete<br />
equiPment
Screeds<br />
The easy way to a smooth surface<br />
The <strong>Atlas</strong> <strong>Copco</strong> screed range features reliable equipment<br />
for surface leveling and vibration – from single beam<br />
screeds with working widths of two meters to modular<br />
screeds that can cover 25-meter bridges or runways.<br />
User-friendly designs and smart solutions that protect<br />
vital parts make for appreciated long life products.<br />
Great result<br />
Our single beam screeds are very effective and easy to<br />
use thanks to low weight and ergonomic features such as<br />
a telescopic handle that allows the operator to work from<br />
outside the slab. We also offer double beam screeds with<br />
powerful in-depth action, lightweight aluminum design for<br />
ease of handling and excellent balance for level floors. For<br />
the really big challenges, such as floors up to 25 meters<br />
wide we have the robust, yet flexible, modular screeds<br />
that are easily assembled by a single operator. The BT90<br />
provides really deep vibration effect. Thanks to the heavy<br />
steel frame it can remove air voids down to a depth of<br />
20 cm.<br />
50
51<br />
concrete<br />
equiPment
Single beam screeds<br />
Finishing beams is one of the<br />
most convenient ways to treat wet<br />
concrete surface. Our models are<br />
stable, reliable and easy-to-use.<br />
Available with electric or petrol<br />
driven vibration unit and in an manual<br />
version without vibration unit.<br />
Features:<br />
• Lightweight aluminium design<br />
• Rigid screed blade<br />
• Easy to clean<br />
BV20<br />
Single beam screeds<br />
Single beams BV20E BV20G BV20H<br />
BV20H<br />
ext. tube<br />
Working width m 2,0 2,0 2,0 -<br />
Weight operating kg 18 14,8 7,4 1,5<br />
Length handle m 1,8+1,8 1,8+1,8 1,8+1,8 1,8<br />
Energy Electric Petrol Manual -<br />
Motor<br />
52<br />
230V-1-50/60<br />
Hz<br />
Power kW (hp) 0,27<br />
4-stroke<br />
Honda GX25<br />
0,7 (1,0)<br />
at 7000 rpm<br />
- -<br />
- -<br />
Vibration frequency Hz 166 up to 166 - -<br />
Centrifugal force N 2000 max 1100 - -<br />
Vibration value m/s2 - 3,2 - -<br />
Noise level dB(A) - 91 - -<br />
Part number 4812 0511 49 4812 0511 51 4812 0511 54 4700 0022 59<br />
Important: Full details of measurement is available in the Safety and Operating Instruction of<br />
the product. It can be found on www.acprintshop.com.
BV30<br />
Single beam screed<br />
Screed blade 1,8 m 2,4 m 3,0 m 3,6 m 4,2 m<br />
Working width m 1,82 2,44 3,05 3,66 4,26<br />
Weight incl<br />
drive unit<br />
kg 6,5 8 9,6 11,2 12,8<br />
Part number D604 0329 58 D604 0329 59 D604 0329 18 D604 0329 60 D604 0329 61<br />
Weigh, drive unit kg<br />
BV30 Drive Unit<br />
13,5<br />
Vibrating unit 1) 4-stroke Honda GX35<br />
Power kW (hp) 1,2 (1,6) at 7000 rpm<br />
Vibration frequency Hz up to 166<br />
Centrifugal force N max 3 460<br />
Vibration value m/s2 3,25<br />
Noise level dB(A) 108<br />
Part number<br />
without blade<br />
4812 0510 05<br />
1) The driving unit is delivered without screed blades which needs to be ordered separately<br />
Important: Full details of measurement is available in the Safety and Operating Instruction of<br />
the product. It can be found on www.acprintshop.com.<br />
53<br />
concrete<br />
equiPment
Double beam screeds<br />
Powerful in-depth action, lightweight aluminium design<br />
for easy handling and excellent balance for even floors.<br />
Smooth surfaces allow the concrete to come of easily<br />
when cleaning.<br />
Features:<br />
• Turnable drive unit<br />
• Made of non-corrosive aluminium<br />
• Adjustable tensioning rods<br />
• Easy to clean<br />
• Quick clamping for rapid change of vibrating unit<br />
BD<br />
Double beam screeds<br />
BD Double vibrating beams BD32 BD42 BD52 BD62<br />
Height of profile mm 100 100 100 100<br />
Width between profiles mm 300 300 300 300<br />
Length m 3,2 4,2 5,2 6,2<br />
Part number 4812 0508 99 4812 0509 00 4812 0509 01 4812 0509 02<br />
1) Two sections for easier transportation<br />
BD Vibrating Units BE20 BE20 BE20 BE200<br />
Type Electric Electric Electric Electric<br />
Voltage/Engine Type 400V-3-50HZ 440V-3-50HZ 380V-3-60HZ 400V-3-50HZ<br />
Power input kW 0,45 0,45 0,45 0,45<br />
Weight kg 19 19 19 19<br />
Suitable for beam BD32 – BD62 BD32 – BD62 BD32 – BD62 BD520 – BD800<br />
Noise level dB(A) 94 94 94 94<br />
Vibration value 2) m/s 2 2,5 2,5 2,5 2,5<br />
Part number 4812 0508 96 4812 0511 18 4812 0511 17 4812 0508 97<br />
2) Vibration value measured at the rope handle which is connected via a rope to the beam.<br />
Vibration value at the fixed beam handle is 25m/s2 Accessories for BD beams Outrigger Outrigger with lifting device<br />
Type U 2 U 3<br />
Suitable for beam All BD beams All BD beams<br />
Part number 4700 0211 45 4700 0112 24<br />
54
BD520 BD620 BD720 BD800 BD802 1) BD842 1) BD942 1)<br />
150 150 150 150 150 150 150<br />
300 300 300 300 300 300 300<br />
5,2 6,2 7,2 8,0 8,0 (2 x 4m) 8,4 (2 x 4,2m) 9,4 (2 x 4,7m)<br />
4812 0509 03 4812 0509 04 4812 0509 05 4812 0509 06 4812 0509 07 4812 0509 08 4812 0509 09<br />
BE200 BE200 BE202 BE202 BE202 BE30 GX120<br />
Electric Electric Electric Electric Electric Petrol<br />
440V-3-50HZ 380V-3-60HZ 400V-3-50HZ 440V-3-50HZ 380V-3-60HZ<br />
Honda GX 120<br />
4-stroke<br />
0,45 0,45 0,45 0,45 0,45<br />
2,3 (3,5 Hp)<br />
(output power)<br />
19 19 19 19 19 35<br />
BD520 – BD800 BD520 – BD800 BD802 – BD942 BD802 – BD942 BD802 – BD942 BD32 – BD720<br />
94 94 94 94 94 94<br />
2,5 2,5 2,5 2,5 2,5 3<br />
4812 0511 20 4812 0511 19 4812 0508 98 4812 0511 22 4812 0511 21 4812 0510 04<br />
Important: Full details of measurement is available in the Safety and Operating Instruction<br />
of the product. It can be found on www.acprintshop.com.<br />
Skate (complete set) Skate (complete set)<br />
SKT SKT<br />
BD32 – BD62 BD520 – BD942<br />
4700 8005 15 4700 0223 64<br />
55<br />
concrete<br />
equiPment
modular screeds<br />
With big challenges ahead, like up<br />
to 25 meter wide floors, runways<br />
or bridges that need compaction,<br />
levelling and finishing the BT90 is a<br />
very effective partner.<br />
A robust modular construction with rigid triangular shaped<br />
sections and great protection of vital parts ensures long<br />
lifetime and easy service. No special tools needed for<br />
assembly.<br />
Features:<br />
• Screeds sections in different lengths<br />
• Electric, pneumatic or petrol driven<br />
• Easy cleaning<br />
BT90<br />
Modular Screed – Drive section 1)<br />
56<br />
Drive section<br />
Electric<br />
Drive section<br />
Petrol<br />
Drive section<br />
Pneumatic<br />
Length mm 720 720 278<br />
Width mm 535 620 585<br />
Height mm 980 980 970<br />
Frequency rpm 2865 2900 -<br />
Input kW 3 5,5 -<br />
Powered by 400V-3-50 Hz Honda GX 270 Compressor<br />
Part number 4812 0509 95 4812 0509 96 4812 0509 94<br />
1) Opposite-end section is delivered with the drive sections.<br />
BT90<br />
Modular Screed – Screed section<br />
Screed sections,<br />
1 m section<br />
Screed sections,<br />
2 m section<br />
Screed sections,<br />
3 m section<br />
Length mm 1095 2095 3095<br />
Width mm 420 420 420<br />
Height<br />
Part number<br />
mm 376 376 376<br />
Pneumatic 4812 0509 98 4812 0510 00 4812 0510 02<br />
Electric/Petrol 4812 0509 97 4812 0509 99 4812 0510 01
BT90<br />
Accessories<br />
0,5 m<br />
extension<br />
Outrigger<br />
(with rollers)<br />
Crown Invert<br />
bracket (only<br />
for pneumatic<br />
sections)<br />
Skate<br />
(complete set<br />
with adaptor)<br />
Length mm 500 372 - -<br />
Width mm 420 300 - -<br />
Height mm 421 300<br />
Part number 4812 0510 03 4812 0510 49 4812 0510 50 4812 0511 83<br />
57<br />
concrete<br />
equiPment
Formwork rails<br />
The Combiform Screed rail is a leave-in-place rail and<br />
stopper made out of metal with a removable plastic strip<br />
on top for the screed to slide on.<br />
Screed rail is an easier way to level concrete floor with<br />
less filling work.<br />
Features:<br />
• Different length screeds<br />
• Plastic adjustment screws<br />
• Lightweight<br />
Track rail system for BT90 and BD double beams<br />
Model Adjustable Rail Support Tripod 270 mm<br />
Type F 2 FR 270*<br />
Part number 4700 0443 66 4700 0325 10<br />
*) Use with F2<br />
CombiForm<br />
Model CombiForm, 25 mm 1) CombiForm, 45 mm 1) CombiForm, 65 mm 1)<br />
Type C 25 C 45 C 65<br />
Length m 3,5 3,5 3,5<br />
Height mm 25 45 65<br />
H-1 mm - 30 28<br />
H-2 mm - - 47<br />
H-3 mm - -<br />
Width mm 80 90 105<br />
Weight kg/m 0,80 0,85 1,10<br />
Part number 4700 0021 36 4700 0019 72 4700 0019 91<br />
1) Note! Combiform must be ordered in multiples of 35 units. example; 35, 70, 105 etc<br />
58<br />
Elevating<br />
strip<br />
Ground<br />
plate<br />
Screw,<br />
25 mm<br />
Screw,<br />
60 mm<br />
Screw,<br />
90 mm<br />
Type Box of 100 pc Box of 100 pc Box of 100 pc<br />
Length mm 3,5<br />
Height mm 30<br />
Width mm 8<br />
Part number 4700 0022 08 4700 0020 01 4700 0022 06 4700 0020 00 4700 0022 07<br />
Locking Clip C-45 Locking clip C-65 Locking clip C-85<br />
4700 0028 09 4700 0028 10 4700 0028 11
Support Tube, Dia 35 mm,<br />
in 6 m length<br />
Track Rail 100x50x3 mm,<br />
L= 6 m<br />
TB 35* Rail<br />
4700 0007 22 4700 0006 56<br />
CombiForm, 85 mm 1) CombiForm, 105 mm 1) CombiForm, 125 mm 1) CombiForm, 145 mm 1)<br />
C 85 C 105 C 125 C 145<br />
3,5 3,5 3,5 3,5<br />
85 105 125 145<br />
31 32 32 32<br />
49 53 64 75<br />
67 88 109 127<br />
115 130 135 160<br />
1,25 1,55 1,90 2,20<br />
4700 0019 73 4700 0019 74 4700 0019 75 4700 0019 76<br />
Adjustment tool,<br />
440 mm<br />
Adjustment tool,<br />
1300 mm<br />
Levelling stick<br />
Adj. tool<br />
Drill adaptor<br />
4700 0020 28 4700 0020 27 4700 0020 29 3382 0106 42<br />
Locking clip C-105 Locking clip C-125 Locking clip C-145<br />
4700 0028 12 4700 0028 13 4700 0028 14<br />
59<br />
concrete<br />
equiPment
trowels<br />
Efficiency on all jobs<br />
The <strong>Atlas</strong> <strong>Copco</strong> range of trowels covers all kind of jobs<br />
from large industrial floors to small confined spaces.<br />
Ergonomic solutions and good safety features are<br />
included in the offer. To make the deal even better all<br />
products are highly reliable. The gearboxes on our trowels<br />
have two-year warranties for instance.<br />
If you’re looking for high capacity and great handling<br />
control the BG370 and BG470 is the right choice. On the<br />
BG Combi two interchangeable protection rings – 850<br />
and 1020 mm – and spring lock blade fastening, makes<br />
switching machine trowel diameters between 850, 915<br />
and 1020 mm quick and easy. The smaller BG240, 600<br />
mm diameter, features a cast rotating protection ring with<br />
rubber edges for easy access close to walls and other<br />
obstacles.<br />
Operator friendly design<br />
We work hard to make handling, transportation and maintenance<br />
as user-friendly and safe as possible. The belt<br />
clutch on our petrol-driven trowels is a good example. It<br />
resolves two important issues – variable speed and the<br />
immediate halt of the rotating blades in the case of a loss<br />
of control – simply by using a V-belt and a worm gear.<br />
Adjustable and foldable handles, reduced hand and arm<br />
vibration, user friendly assembled controls and smooth<br />
handling are other appreciated features.<br />
60
61<br />
concrete<br />
equiPment
edger trowels<br />
Small jobs can be as challenging as big<br />
ones. The BG240 trowel is developed to<br />
assist in those confined, hard to work in,<br />
areas. With its diameter of just 600 mm<br />
and a casted rotating protection ring with<br />
rubber edges it’s perfect for those hard<br />
to reach places such as close to walls or<br />
other obstacles.<br />
Features:<br />
• Safety belt-clutch with direct stop<br />
• Variable speed on petrol models<br />
• Adjustable handle<br />
• Quick release blades available<br />
• Rotating protection ring<br />
• Easy to clean<br />
BG240 Power Trowels<br />
Walk-behind trowels,<br />
Petrol and electric versions<br />
Edger trowels BG240<br />
Protection ring diameter mm 615<br />
Operating weight kg 59<br />
Blade diameter mm 600<br />
Disc diameter mm 610<br />
Floating blade diamter mm -<br />
Blade speed rpm 40-115<br />
Number of blades 4<br />
Type of handle Short foldable<br />
Pitch control Twist-Pitch<br />
Engine Honda GX120 (4-stroke)<br />
Power kW (hp) 2,9 (4,0)<br />
Fuel Petrol<br />
Fuel tank capacity l 2,5<br />
Lifting hook Standard<br />
Transport wheels Accessory<br />
Blade arm type Bolt-on<br />
Vibration value m/s2 Noice level dB(A)<br />
Model code H4-S-TP<br />
Part number 3382 0000 99<br />
Important: Full details of measurement is available in the Safety and Operating Instruction of<br />
the product. It can be found on www.acprintshop.com.<br />
62
BG240 BG240 BG240<br />
615 615 615<br />
59 59 59<br />
600 600 600<br />
610 610 610<br />
- - -<br />
40-115 120 120<br />
4 4 4<br />
Short foldable Short foldable Short foldable<br />
Quick-Pitch Twist-Pitch Quick-Pitch<br />
Honda GX120 (4-stroke) 230V-1-50/60Hz 230V-1-50/60Hz<br />
2,9 (4,0) 1,5 (input) 1,5 (input)<br />
Petrol - -<br />
2,5 - -<br />
Standard Standard Standard<br />
Accessory Accessory Accessory<br />
Bolt-on Bolt-on Bolt-on<br />
H4-S-QP E-S-TP E-S-QP<br />
3382 0001 00 3382 0001 01 3382 0001 02<br />
63<br />
concrete<br />
equiPment
Power trowels<br />
BG370 and BG470 forms a dynamic<br />
series of high capacity trowels with<br />
trowel diameters from 900 to 1200<br />
mm, power output from 5,5 to 9 hp<br />
and two different handle lengths.<br />
Features:<br />
• Safety belt-clutch with direct stop<br />
• Variable speed on petrol models<br />
• Adjustable handle<br />
• Quick release blades available<br />
• Easy to clean<br />
BG370 / BG470 Power Trowels<br />
Walk-behind trowels,<br />
Petrol versions<br />
Power trowels BG370 BG370<br />
Protection ring diameter mm 950 950<br />
Operating weight kg 88 89<br />
Blade diameter mm 900 900<br />
Disc diameter mm 945 945<br />
Floating blade diamter mm 945 945<br />
Blade speed rpm 40-115 40-115<br />
Number of blades 4 4<br />
Type of handle Short Short<br />
Pitch control Twist-Pitch Twist-Pitch<br />
Engine Honda GX160 (4-stroke) Honda GX200 (4-stroke)<br />
Power kW (hp) 4,1 (5,5) 4,8 (6,5)<br />
Fuel Petrol Petrol<br />
Fuel tank capacity l 3,1 3,1<br />
Lifting hook Standard Standard<br />
Transport wheels Accessory Accessory<br />
Blade arm type Quick release / Bolt-on Quick release / Bolt-on<br />
Model code H5-S-TP H6-S-TP<br />
Part number 3382 0001 03 3382 0001 05<br />
Important: Full details of measurement is available in the Safety and Operating Instruction of<br />
the product. It can be found on www.acprintshop.com.<br />
64
BG370 BG370 BG470<br />
950 950 1200<br />
93 102 105<br />
900 900 1140<br />
945 945 -<br />
945 945 1160<br />
40-115 450-115 40-115<br />
4 4 4<br />
Long Long Long<br />
Twist-Pitch Twist-Pitch Twist-Pitch<br />
Honda GX200 (4-stroke) Honda GX270 (4-stroke) Honda GX270 (4-stroke)<br />
4,8 (6,5) 6,6 (9,0) 6,6 (9,0)<br />
Petrol Petrol Petrol<br />
3,1 5,3 5,3<br />
Standard Standard Standard<br />
Accessory Accessory Accessory<br />
Quick release / Bolt-on Quick release / Bolt-on Bolt-on<br />
H6-L-TP H9-L-TP H9-L-TP<br />
3382 0001 06 3382 0001 07 3382 0001 10<br />
65<br />
concrete<br />
equiPment
combi trowels<br />
User-friendly and effective electrically<br />
driven machine for demanding industrial<br />
floor work. Two interchangeable<br />
protection rings, 850 and 1020 mm,<br />
with steel wire net for perfect look trough and spring lock<br />
fastening of the blades makes it fast and easy to change<br />
trowel diameter between 850, 915 and 1020 mm in the<br />
same machine.<br />
Features:<br />
• Adjustable handle<br />
• Easy cleaning<br />
• Built in carrying handle<br />
• Transport wheels standard<br />
• Two speed selection<br />
BGCombi Power Trowels<br />
Single hand-guided trowels,<br />
Electric versions<br />
Combi trowels BGCombi BGCombi<br />
Protection ring diameter mm 850 1020<br />
Operating weight kg 88 90<br />
Blade diameter mm 850 850/915/980<br />
Disc diameter mm 865 865/965/1015<br />
Floating blade diameter mm - -<br />
Blade speed rpm 60/120 60/120<br />
Number of blades 4 4<br />
Type of handle Long Long<br />
Pitch control Twist-Pitch Twist-Pitch<br />
Engine 400V-3-50/60Hz 400V-3-50/60Hz<br />
Low/High speed input power kW (hp) 1,6 (2,4) 1,6 (2,4)<br />
Lifting hook Standard Standard<br />
Transport wheels Standard Standard<br />
Blade arm type Quick release Quick release<br />
Vibration value m/s2 3,6 3,6<br />
Sound power, guaranteed Lwa dB(A) 94 94<br />
Sound pressure at operators ear LpA dB(A) 77 77<br />
Model code E-L-TP E-L-TP<br />
Part number 3382 0001 08 3382 0001 09<br />
Important: Full details of measurement is available in the Safety and Operating Instruction of<br />
the product. It can be found on www.acprintshop.com.<br />
66
orKA concrete and<br />
Asphalt floor saws<br />
Orka is a very operator friendly floor saw<br />
with all major controls – such as on/off<br />
switch, throttle control and in depth<br />
control placed together for easy use.<br />
Features:<br />
• Large water tank<br />
• Two disc sizes possible<br />
• Easy service and cleaning<br />
Model ORKA 350/450 ORKA 350/450D<br />
Standard disc size mm 350 or 450 350 or 450<br />
Max. cutting depth mm 175 175<br />
Engine Honda GX390 QXC4 Lombardini 15 LD 350<br />
Fuel Petrol Diesel<br />
Power kW (hp) 9,6 (13) 5,1 (7)<br />
Water tank capacity l 30 30<br />
Weight kg 98 108<br />
Vibration value ms 2 9,8 9,8<br />
Noice level dB(A) 113 115<br />
Part number 4812 0510 07 4812 0510 08<br />
Diamond disks for floor saws<br />
Type 350F 350C<br />
Blade diameter mm 350 350<br />
Pcs/pack 5 5<br />
Blade type For fresh concrete For old concrete<br />
Part number 4700 3685 94 4700 3685 93<br />
Type 350A 450F<br />
Blade diameter mm 350 450<br />
Pcs/pack 5 1<br />
Blade type For asphalt For fresh concrete<br />
Part number 4700 3685 92 4700 3685 95<br />
Type 450C 450A<br />
Blade diameter mm 450 450<br />
Pcs/pack 1 1<br />
Blade type For old concrete For asphalt<br />
Part number 4700 3685 87 4700 3685 88<br />
Important: Full details of measurement is available in the Safety and Operating Instruction of<br />
the product. It can be found on www.acprintshop.com.<br />
67<br />
concrete<br />
equiPment
Handheld pneumatics<br />
Solid Body concept<br />
The one-piece machine body means fewer parts helping<br />
to increase reliability. The concept also gives a low centre<br />
of gravity to our breakers and thus a good balance of the<br />
product.<br />
HAPS system<br />
By reducing the in-use vibration value of the machine,<br />
<strong>Atlas</strong> <strong>Copco</strong>’s HAPS system helps to decrease the<br />
negative effects of harmful vibration at a given trigger<br />
time.<br />
Highly efficient silencer<br />
The wear-resistant polyurethane silencer cuts the noise<br />
emission by up to 75% (as compared to the same<br />
machine without noise reduction, ISO 2000/14/EC).<br />
SOFSTART trigger<br />
The two-step trigger gives the operator full control when<br />
starting a cut – even under difficult conditions. Available<br />
with selected tools only.<br />
Air cushioned piston<br />
To reduce vibration and wear, the piston turns on aircushions<br />
at either end of the cylinder. When working offload,<br />
this practically eliminates metal-to-metal contact.<br />
Rotating air inlet swivel<br />
Easy handling of the tool, even when pressurized.<br />
Available with selected tools only.<br />
Integrated lubricator<br />
Helps to minimize tool wear and is excellent for cold<br />
conditions, when it can be used for anti-freeze, such<br />
as <strong>Atlas</strong> <strong>Copco</strong> Breaker and Hammer AIR-OIL. It holds<br />
enough lubricant for an entire shift. Available with<br />
selected tools only.<br />
68
69<br />
HandHeld<br />
pneumatics
pneumatic vibro-reduced<br />
hammers teX 05-teX 12<br />
6,5-12 kg<br />
Applications depending on weight class:<br />
• Light duty chipping and scaling work<br />
• Renovation and conversion work<br />
• Demolition<br />
• Kiln stripping<br />
Features:<br />
• Full canopy vibro-reduction (TEX 05, 09 and 12)<br />
• Noise-reduction<br />
• SOFSTART two-step trigger<br />
• HAPS Hand and Arm Protection System<br />
• Air cushioned piston (TEX 05, 09 and 12)<br />
• Easy handling and positioning<br />
See also Parts and Services Catalogue:<br />
• Working tools<br />
• Accessories<br />
• Breaker and Hammer AIR-OIL<br />
Pneumatic hammers TEX 07PE TEX 07PE FSH 2<br />
70<br />
Weight kg 8,5 9<br />
Length mm 525 525<br />
Air consumption l/s 17 17<br />
Impact rate blows/min 1770 1770<br />
Vibration level 3 axes (ISO 20643) 3) m/s² 12,4 10,5<br />
Sound power level guaranteed (2000/14/EC) 3) Lw, dB(A) 104 104<br />
Sound pressure level (ISO 11203) 3) Lp, r=1m 87 87<br />
Tool retainer cap cap<br />
Shank size HEX mm 19x50 19x50<br />
Part number (HEX shank) 8461 0209 20 8461 0209 21<br />
Shank size round shank mm - -<br />
Part number (round shank) - -<br />
Data at 6 bar (90 psi) air pressure<br />
PE: silenced, vibro-reduced<br />
PER: silenced, vibro-reduced,<br />
round shank<br />
FSH: Front side handle<br />
Suitable couplings:<br />
TEX 05PE <strong>Atlas</strong> <strong>Copco</strong> Standard 9000 0305 00<br />
TEX 09 & 12 <strong>Atlas</strong> <strong>Copco</strong> Standard 9000 0306 00<br />
<strong>Atlas</strong> <strong>Copco</strong> Standard w strainer 9000 0306 01<br />
US standard 9001 0005 06
TEX 05PE 1 TEX 09PE/PER 1,2 TEX 12PE/PER 1,2<br />
6,5 10,5 12<br />
450 560 590<br />
10 17 20<br />
2640 1800 1620<br />
2,4 4,2 4,0<br />
105 105 105<br />
87 93 93<br />
cap kick-latch kick-latch<br />
19x50 22x82,5 22x82,5<br />
8461 0219 10 8461 0211 35 8461 0211 38<br />
- 25x75 25x75<br />
- 8461 0211 36 8461 0211 39<br />
1) Claw couplings not included in delivery of TEX 05, 09 and 12.<br />
2) Front side handle included<br />
3) Important: Full details of measurement are available in the Safety and Operating<br />
Instruction of the product (part no 9800 0812 90, TEX 07PE in 9800 0653 90).<br />
They can be found on www.acprintshop.com<br />
71<br />
HandHeld<br />
pneumatics
pneumatic standard<br />
hammers teX 3-teX 12<br />
3,5-12,5 kg<br />
Applications depending on weight class:<br />
• Light-duty chipping and scaling work<br />
• Renovation and conversion work<br />
• Demolition<br />
Features:<br />
• SOFSTART two-step trigger (selected models)<br />
• Noise-reduction<br />
• Air cushioned piston<br />
See also Parts and Services Catalogue:<br />
• Working tools<br />
• Accessories<br />
• Breaker and Hammer AIR-OIL<br />
Pneumatic hammers TEX 3 2 TEX 05P 1,2<br />
Weight kg 3,5 5,5<br />
Length mm 310 380<br />
Air consumption l/s 6,9 9,5<br />
Impact rate blows/min 4080 2760<br />
Vibration level 3 axes (ISO 20643) 3) m/s² 14 13<br />
Sound power level guaranteed (2000/14/EC) 3) Lw, dB(A) 104 104<br />
Sound pressure level (ISO 11203) 3) Lp, r=1m 92 92<br />
Tool retainer cap cap<br />
Shank size HEX mm 19x50 19x50<br />
Part number (HEX shank) 8461 0208 53 8461 0219 00<br />
Shank size round shank mm 17,3x60<br />
Part number (round shank) - 8461 0219 03<br />
Data at 6 bar (90 psi) air pressure<br />
1) also available with combined hexagonal/round shank (part no: 8461 0219 01)<br />
2) also available in carrying case as complete set (hexagonal shank only)<br />
3) Important: Full details of measurement are available in the Safety and Operating Instruction<br />
of the product (part no 9800 0799 90). It can be found on www.acprintshop.com<br />
KL: kick latch, PS: silenced, PSR: round shank<br />
72
TEX 09 TEX 10 TEX 12<br />
PS KL PS/PSR PS KL PS/PSR PS KL/PSR KL PS/PSR<br />
12 10 10,5 10 12,5 10,5<br />
500 500 500 520 545 550<br />
18,5 18,5 17 17 21,3 21,3<br />
1800 1800 1350 1350 1600 1600<br />
16,1 16,1 22,4 22,4 15,4 15,4<br />
105 103 103 102 105 105<br />
93 91 91 90 92 93<br />
kick-latch cap kick-latch cap kick-latch cap<br />
22x82,5 22x82,5 22x82,5 22x82,5 22x82,5 22x82,5<br />
8461 0211 05 8461 0211 02 8461 0211 32 8461 0211 30 8461 0211 12 8461 0211 13<br />
US: 8461 0211 06 US: 8461 0211 16<br />
25x75 25x75 25x75 25x75<br />
- 8461 0211 04 - 8461 0211 31 8461 0211 15 8461 0211 14<br />
Claw couplings not included in delivery<br />
Suitable couplings:<br />
TEX 09, 10 and 12 <strong>Atlas</strong> <strong>Copco</strong> Standard 9000 0306 00<br />
<strong>Atlas</strong> <strong>Copco</strong> Standard with strainer 9000 0306 01<br />
US Standard (not for TEX 10) 9001 0005 06<br />
TEX 05, TEX 3 <strong>Atlas</strong> <strong>Copco</strong> Standard 9000 0305 00<br />
73<br />
HandHeld<br />
pneumatics
pneumatic breakers<br />
teX 140-teX 280<br />
15-31 kg<br />
Applications:<br />
• Light and medium sized breakers for service jobs<br />
and general demolition in soft and medium hard<br />
materials<br />
Features:<br />
• Solid Body concept<br />
• Noise-reduction<br />
• HAPS Hand and Arm<br />
Protection System (PE<br />
series)<br />
• SOFSTART two-step<br />
trigger<br />
• Rotating air inlet swivel<br />
Pneumatic breakers TEX 140PS TEX 150PE TEX 180PS<br />
Vibro-reduced NO NO YES YES NO NO<br />
Weight kg 15,5 15,5 19 19 19 19,5<br />
Length mm 590 590 590 590 595 645<br />
Air consumption l/s 25 25 25 25 26 26<br />
Impact rate bpm 1530 1530 1530 1530 1500 1500<br />
Vibration level 3 axes<br />
(ISO 20643) 1) m/s 2 15,2 15,2 4,5 4,5 14,5 14,5<br />
Sound power level<br />
guaranteed (2000/14/EC) 1) Lw, dB(A) 104 104 104 104 104 104<br />
Sound pressure level<br />
(ISO 11203) 1) Lp, r=1m 91 91 91 91 92 91<br />
Shank size Hex mm 22x82,5 25x108 22x82,5 25x108 25x108 28x160<br />
Available shank sizes 2) 22x82,5 25x108<br />
TEX 140PS Part number 8461 0223 30 8461 0223 32<br />
TEX 150PE Part number 8461 0223 31 8461 0223 33<br />
TEX 180PS Part number − 8461 0224 30<br />
TEX 190PE Part number − 8461 0224 31<br />
TEX 220PS Part number − 8461 0225 30<br />
TEX 230PE Part number − 8461 0225 31<br />
TEX 270PS Part number − −<br />
TEX 280PE Part number − −<br />
Data at 6 bar (90 psi) air pressure<br />
1) Important: Full details of measurement are available in the Safety and Operating Instruction<br />
of the product (part no 9800 0683 90). It can be found on www.acprintshop.com<br />
2) Hex shank (mm)<br />
74<br />
• Integrated lubricator<br />
• Air cushioned piston<br />
See also Parts and<br />
Services Catalogue:<br />
• Working tools<br />
• Accessories<br />
• Breaker and Hammer<br />
AIR-OIL
TEX 190PE TEX 220PS TEX 230PE TEX 270PS TEX 280PE<br />
YES YES NO NO NO YES YES YES NO NO YES YES<br />
22,5 23 22 23,5 23,5 25,5 27 27 28 28 31,5 31,5<br />
595 645 625 670 670 625 670 670 690 690 690 690<br />
26 26 30 30 30 30 30 30 32 32 32 32<br />
1500 1500 1320 1320 1320 1320 1320 1320 1230 1230 1230 1230<br />
3,7 3,7 12,8 12,8 12,8 4,2 4,2 4,2 14,9 14,9 4,8 4,8<br />
104 104 104 106 106 104 106 106 105 105 105 105<br />
92 91 92 93 93 92 93 93 92 92 92 92<br />
25x108 28x160 25x108 28x160 32x160 25x108 28x160 32x160 28x160 32x160 28x160 32x160<br />
25x108 US 28x160 32x160<br />
8461 0223 34 − −<br />
8461 0223 35 − −<br />
8461 0224 34 8461 0224 32 −<br />
8461 0224 35 8461 0224 33 −<br />
− 8461 0225 32 8461 0225 33<br />
− 8461 0225 34 8461 0225 35<br />
− 8461 0226 30 8461 0226 31<br />
− 8461 0226 32 8461 0226 33<br />
Claw couplings not included in delivery<br />
Suitable couplings:<br />
<strong>Atlas</strong> <strong>Copco</strong> Standard 9000 0306 00<br />
<strong>Atlas</strong> <strong>Copco</strong> Standard with strainer 9000 0306 01<br />
US Standard 9001 0005 06<br />
75<br />
HandHeld<br />
pneumatics
pneumatic breakers<br />
teX 20-teX 21<br />
20-21 kg<br />
Applications:<br />
• Medium sized breakers for service jobs and<br />
general demolition in medium hard materials<br />
like asphalt and concrete<br />
Features:<br />
• Noise-reduction<br />
• HAPS Hand and Arm Protection System<br />
(PE series)<br />
• Air cushioned piston<br />
• Hard hitting in relation to their weight due<br />
to extra long piston stroke<br />
See also Parts and Services Catalogue:<br />
• Working tools<br />
• Accessories<br />
• Breaker and Hammer AIR-OIL<br />
Pneumatic breakers TEX 20PS TEX 20PS-1 TEX 21PE TEX 21PE-1<br />
Weight kg 20 20 21 21<br />
Length mm 635 600 650 615<br />
Air consumption l/s 25 25 25 25<br />
Impact rate blows/min 1140 1140 1140 1140<br />
Vibration level 3<br />
axes (ISO 20643) 1) Sound power level<br />
m/s² 18,3 18,3 7,6 7,6<br />
guaranteed<br />
(2000/14/EC) 1)<br />
Lw, dB(A) 105 105 105 105<br />
Sound pressure level<br />
(ISO 11203) 1) Lp, r=1m 93 93 93 93<br />
Shank size mm H 25x108<br />
76<br />
R 25x75 w.<br />
square collar<br />
H 25x108<br />
R 25x75 w.<br />
square collar<br />
Part number 8461 0224 20 8461 0224 21 8461 0224 22 8461 0224 23<br />
1) Important: Full details of measurement<br />
are available in the<br />
Safety and Operating Instruction<br />
of the product (part no<br />
9800 0650 90) It can be found<br />
on www.acprintshop.com<br />
Data at 6 bar (90 psi) air pressure.<br />
Claw couplings not included in delivery<br />
Suitable couplings:<br />
<strong>Atlas</strong> <strong>Copco</strong> Standard 9000 0306 00<br />
<strong>Atlas</strong> <strong>Copco</strong> Standard with strainer 9000 0306 01
pneumatic breakers<br />
teX p60-teX p90<br />
33-43 kg<br />
Applications:<br />
• Heavy-duty breakers for use in medium and hard<br />
materials such as asphalt and concrete<br />
• TEX P60: asphalt and other medium hard materials<br />
• TEX P90: hard/reinforced concrete<br />
Features:<br />
• Solid Body concept<br />
• Noise-reduction<br />
• SOFSTART two-step trigger<br />
• Rotating air inlet swivel<br />
• Integrated lubricator<br />
• Air cushioned piston<br />
See also Parts and Services Catalogue:<br />
• Working tools<br />
• Accessories<br />
• Breaker and Hammer AIR-OIL<br />
Pneumatic breakers TEX P60S TEX P90S<br />
Weight kg 33 33 43 43<br />
Length mm 690 690 710 710<br />
Air consumption l/s 36 36 40 40<br />
Impact rate blows/min 1500 1500 1260 1260<br />
Vibration level 3<br />
axes (ISO 20643) 1) Sound power level<br />
m/s² 16,8 16,8 15,3 15,3<br />
guaranteed<br />
(2000/14/EC) 1)<br />
Lw, dB(A) 109 109 111 111<br />
Sound pressure level<br />
(ISO 11203) 1) Lp, r=1m 97 97 99 99<br />
Shank size Hex mm 28x160 32x160 28x160 32x160<br />
Part number 8461 0227 22 8461 0227 23 8461 0228 22 8461 0228 23<br />
1) Important: Full details of<br />
measurement are available<br />
in the Safety and Operating<br />
Instruction of the product<br />
(part no 9800 0650 90).<br />
It can be found on<br />
www.acprintshop.com<br />
Data at 6 bar (90 psi) air pressure.<br />
Unsilenced models available on request in some markets.<br />
Claw couplings not included in delivery.<br />
Suitable couplings:<br />
<strong>Atlas</strong> <strong>Copco</strong> Standard 9000 0306 00<br />
<strong>Atlas</strong> <strong>Copco</strong> Standard with strainer 9000 0306 01<br />
US Standard 9001 0005 06<br />
77<br />
HandHeld<br />
pneumatics
pneumatic breakers<br />
teX 32-teX 40<br />
34-42 kg<br />
Applications:<br />
• Heavy-duty demolition breakers for use in<br />
medium and hard materials such as asphalt and<br />
reinforced concrete<br />
Features:<br />
• Noise-reduction<br />
• HAPS Hand and Arm Protection System (PE series)<br />
• Rotating air inlet swivel<br />
• Integrated lubricator<br />
• Air cushioned piston<br />
See also Parts and Services Catalogue:<br />
• Working tools<br />
• Accessories<br />
• Breaker and Hammer AIR-OIL<br />
Pneumatic breakers TEX 32PS<br />
Weight kg 34 34<br />
Length mm 745 745<br />
Air consumption l/s 34 34<br />
Impact rate blows/min 1200 1200<br />
Vibration level 3 axes (ISO 20643) 1) m/s² 13,7 13,7<br />
Sound power level guaranteed (2000/14/EC) 1) Lw, dB(A) 111 111<br />
Sound pressure level (ISO 11203) 1) Lp, r=1m 99 99<br />
Shank size Hex mm 28x160 32x160<br />
Part number 8461 0227 03 8461 0227 05<br />
Data at 6 bar (90 psi) air pressure.<br />
Unsilenced models TEX 32P and TEX 39P available on request in some markets.<br />
1) Important: Full details of measurement are available in the Safety and Operating Instruction<br />
of the product (part no 9800 0650 90). It can be found on www.acprintshop.com<br />
78
TEX 33PE TEX 39PS TEX 40PE<br />
37 37 39 39 42 42<br />
745 745 750 750 750 750<br />
34 34 40 40 40 40<br />
1200 1200 1110 1110 1110 1110<br />
5,7 5,7 14,3 14,3 4,2 4,2<br />
111 111 111 111 111 111<br />
99 99 99 99 99 99<br />
28x160 32x160 28x160 32x160 28x160 32x160<br />
8461 0227 01 8461 0227 00 8461 0228 03 8461 0228 01 8461 0228 05 8461 0228 04<br />
Claw couplings not included in delivery.<br />
Suitable couplings:<br />
<strong>Atlas</strong> <strong>Copco</strong> Standard 9000 0306 00<br />
<strong>Atlas</strong> <strong>Copco</strong> Standard with strainer 9000 0306 01<br />
US Standard 9001 0005 06<br />
79<br />
HandHeld<br />
pneumatics
pneumatic pumps<br />
Applications DIP:<br />
Centrifugal pumps designed for<br />
clean, low-viscosity liquids such as<br />
water.<br />
Applications DOP:<br />
Diaphragm pump designed for construction, mining and<br />
industrial applications or process industry<br />
• Polluted media<br />
• Viscous media<br />
• Highly abrasive or inflammable fluids<br />
• 15N: mainly for construction industry<br />
• 15F: mainly for process industry<br />
Features:<br />
• Robust<br />
• Cannot be damaged by overloading<br />
Pneumatic pumps DIP 25 DIP 35 DIP 65 DOP 15N DOP 15F<br />
Max. head m 25 35 59 59 59<br />
Max. flow l/s 28 22 11 7 7<br />
Max. air requirement l/s 70 70 70 34 34<br />
Weight kg 23 23 23 31 31<br />
Fluid outlet in G 2 1/2 G 2 1/2 G 2 1/2 G 2 1/2 G 2 1/2<br />
Air inlet in G 3/4 G 3/4 G 3/4 G 3/4 G 3/4<br />
Air outlet in G 1 1/2 G 1 1/2 G 1 1/2<br />
Part number 8492 0103 20 8492 0103 38 8492 0106 19 8492 0101 48 8492 0101 63<br />
Data at 6 bar (90 psi) air pressure.<br />
US versions and pumping kits also available.<br />
80
pneumatic combi drills/<br />
hammers<br />
Applications:<br />
• Plug hole drilling 8-38 mm<br />
diameter<br />
• Wedge hole drilling<br />
• Chipping and scaling<br />
• Renovation and rebuilding<br />
• Underwater work<br />
Features:<br />
• Built-in air flushing<br />
• Noise-reduction<br />
• Switching between drilling/chipping<br />
by change of working tool<br />
• Built-in lubricator<br />
See also Parts and Services Catalogue:<br />
• Working tools<br />
• Rock drill AIR-OIL<br />
DKR 36 Kit<br />
Pneumatic combi drills/hammers DKR 36 4) DKR 36R<br />
Weight kg 4,5 4,5<br />
Length mm 380 380<br />
Air consumption at 6 bar l/s 10 10<br />
Impact rate blows/min 2820 2820<br />
Revolutions rpm 250 250<br />
Penetration rate mm/min 180¹/160² 180¹/160²<br />
Hose connection mm 19 19<br />
Vibration level 3 axes<br />
(ISO 20643) 3)<br />
m/s²<br />
20,2 (breaking)<br />
21,2 (drilling)<br />
20,2 (breaking)<br />
21,2 (drilling)<br />
Sound power level guaranteed<br />
(2000/14/EC) 3) Lw, dB(A) 103 103<br />
Sound pressure level<br />
(ISO 11203) 3) Lp, r=1m 88 88<br />
Shank size mm R19xH14,7x89 R19x95<br />
Part number 8463 0103 60 8463 0103 50<br />
¹) 19 mm drill in granite<br />
²) 19 mm drill in concrete<br />
3) Important: Full details of measurement are available in the Safety and Operating Instruction<br />
of the product (part no 9800 0938 90). It can be found on www.acprintshop.com<br />
4) Also available in carrying case as complete set (8463 0103 61)<br />
81<br />
HandHeld<br />
pneumatics
pneumatic rock drills<br />
Applications:<br />
• Drill up to 2 m depth<br />
• Plug hole drilling<br />
• Anchor and wedge hole drilling<br />
Features:<br />
• Noise-reduction (S-versions)<br />
• HAPS Hand and Arm Protection System (E-versions)<br />
• Built in air flushing<br />
• Trigger version available (ET)<br />
See also Parts and Services Catalogue:<br />
• Accessories<br />
• Rock drill AIR OIL<br />
• Working tools<br />
Pneumatic rock drills BBD 12D BBD 12DS BBD 12DCS<br />
Weight kg 9,8 10,7 10,5<br />
Length mm 565 565 560<br />
Air consumption l/s 24 22 22<br />
Impact rate blows/min 2580 2580 2580<br />
Revolutions rpm 220 220 220<br />
Penetration rate mm/min 250 ¹ ) 230 ¹ ) 230 ¹ )<br />
Hose connection mm 13 13 13<br />
Vibration level 3 axes (ISO 20643) 3) m/s² 22,2 22,2 22,2<br />
Sound power level guaranteed (2000/14/EC) 3) Lw, dB(A) 114 108 108<br />
Sound pressure level (ISO 11203) 3) Lp, r=1m 103 97 97<br />
Shank size mm 19x108 19x108 19x108<br />
Part number 8311 0102 47 8311 0102 80 8311 0101 63<br />
Data at 6 bar (90 psi) air pressure<br />
1) In granite, drilling with 28 mm at 6 bar<br />
2) In granite, drilling with 32 mm at 6 bar<br />
3) Important: Full details of measurement are available in the Safety and Operating Instruction<br />
of the product (part no 9800 0970 90). It can be found on www.acprintshop.com<br />
82
BBD 12T-01 BBD 12TS-01 BBD 15E BBD 15ET<br />
11,1 12,1 15,5 15,5 15,5 15,6 15,6<br />
505 505 575 575 575 575 575<br />
24 22 22 22 22 22 22<br />
2580 2580 2520 2520 2520 2520 2520<br />
220 220 220 220 220 220 220<br />
150 ² ) 150 ² ) 220 ¹ ) 220 ¹ ) 220 ¹ ) 220 ¹ ) 220 ¹ )<br />
19 19 19 19 19 16 16<br />
16 16 7 7 7 7 7<br />
116 111 110 110 110 110 110<br />
103 98 97 97 97 97 97<br />
22x108 22x108 19x108 22x108 22x82,5 19x108 22x108<br />
8311 0102 95 8311 0102 98 8311 0104 02 8311 0104 10 8311 0104 09 8311 0104 12 8311 0104 13<br />
D = D-handle<br />
T = T-handle<br />
E = vibro-reduced handles<br />
ET = vibro-reduced handles, trigger start<br />
C = cap<br />
S = silenced<br />
83<br />
HandHeld<br />
pneumatics
pneumatic rock drills<br />
Applications:<br />
• Drill up to 6 m depth<br />
• Production drilling in quarry/dimension<br />
stone industry<br />
• Blast hole and secondary drilling<br />
Features:<br />
• Noise-reduction (S-versions)<br />
• HAPS Hand and Arm Protection System (E-versions)<br />
• Built in air flushing<br />
• Extra flushing for quick and efficient hole cleaning<br />
See also Parts and Services Catalogue:<br />
• Accessories<br />
• Rock drill AIR OIL<br />
• Working tools<br />
Pneumatic rock drills RH 571-5L RH 571-5LS<br />
Weight kg 18 19<br />
Length mm 510 510<br />
Air consumption l/s 39 39<br />
Impact rate blows/min 2100 1980<br />
Revolutions rpm 190 190<br />
Penetration rate 1) mm/min 295 275<br />
Hose connection mm 19 19<br />
Vibration level 3 axes (ISO 20643) 2) m/s² 23,2 23,2<br />
Sound power level guaranteed (2000/14/EC) 2) Lw, dB(A) 119 112<br />
Sound pressure level (ISO 11203) 2) Lp, r=1m 106 99<br />
Shank size mm 22x108 22x108<br />
Part number 8311 0301 29 8311 0301 37<br />
Data at 6 bar (90 psi) air pressure<br />
1) In granite, drilling with 32 mm at 6 bar<br />
2) Important: Full details of measurement are available in the Safety and Operating Instruction<br />
of the product (part no 9800 0970 90). It can be found on www.acprintshop.com<br />
84
RH 572E RH 658L RH 658LS<br />
23 24 25<br />
583 565 565<br />
37 58 58<br />
2040 2040 2040<br />
170 215 215<br />
260 425 425<br />
19 19 19<br />
9,7 21,2 21,2<br />
113 116 112<br />
100 106 99<br />
22x108 22x108 22x108<br />
8311 0301 78 8311 0302 86 8311 0302 87<br />
E = vibro-reduced handles<br />
S = silenced<br />
85<br />
HandHeld<br />
pneumatics
Rock drills<br />
Underground + feed legs<br />
Applications:<br />
• Production drilling<br />
• Mining and construction<br />
• Dimension stone industry<br />
Features:<br />
• High quality, designed for production drilling<br />
• Noise-reduction (16 WS, 34 WS, 94 WE)<br />
• Built in water flushing<br />
• ATEX certification (BBC 34 WS, BMK 91RS)<br />
• Single or double telescopic pusher legs<br />
See also Parts and Services Catalogue:<br />
• Accessories • Rock drill AIR OIL<br />
Rock drills BBC 16W BBC 16 WS<br />
Silenced<br />
version<br />
Hole range mm 27-41 27-41<br />
Weight kg 28,5 29,5<br />
Length mm 705 705<br />
Air consumption l/s 69 69<br />
Impact rate blows/min 2340 2340<br />
Piston bore mm 70 70<br />
Stroke length mm 55 55<br />
Vibration level 3 axes (ISO 5349-2) 1) m/s² 16,6 16,6<br />
Sound power level guaranteed (2000/14/EC) 1) Lw, dB(A) 122 114<br />
Sound pressure level (ISO 11203) 1) Lp, r=1m 111 103<br />
Part number 8311 0401 10 8311 0303 46<br />
86<br />
Data at 6 bar (90 psi) air pressure.<br />
Pusher legs Single telescope<br />
Type BMT 51 ALF 71 ALF 71-1 ALF 72D<br />
Suitable for rock drill: BBC 16W, 34W BBC 16W, 34W BBC 16W, 34W BBD 94W<br />
Feeding length mm 1300 1300 950 1300<br />
Length retracted mm 1658 1805 1455 1970<br />
Length extracted mm 2958 3105 2405 3270<br />
Weight kg 15 14 13 19<br />
Piston bore mm 60 70 70 70<br />
Part number 8321 0301 01 8321 0201 94 8321 0201 95 8321 0201 80<br />
1) Important: Full details of measurement is available in the Safety and Operating Instruction<br />
of the product. It can be found on www.acprintshop.com.
BBC 34W BBC 34 WS<br />
Silenced<br />
version<br />
BBD 94W BBD 94WE<br />
Silenced<br />
version<br />
BBD 94WS<br />
ATEX<br />
Get more information about Cost-Per-Meter contracts for large fleet owners.<br />
Please contact your <strong>Atlas</strong> <strong>Copco</strong> sales representative for further information.<br />
RH 656W<br />
27-41 27-41 27-41 27-41 27-41 27-41<br />
33,5 34,5 28 28,5 31 22<br />
775 775 670 670 670 658<br />
88 88 97 97 97 48<br />
2280 2280 3300 3300 3300 2040<br />
80 80 90 90 90 65<br />
70 70 45 45 45 59<br />
20,4 20,4 15 15 15 21,2<br />
127 120 125 120 125 120<br />
116 109 114 109 114 115<br />
8311 0408 05 8311 0303 47 8311 0206 09 8311 0303 44 8311 0206 12 8311 0303 45<br />
Double telescope<br />
ALF 72D-1 BMK 62S BMK 91RS ALF 67/80 ALF 67/80D<br />
BBD 94W RH 656W BBD 94WS BBC 16W, 343W BBD 94W<br />
1200 1300 1300 1855 1855<br />
1830 1815 1870 1495 1595<br />
3030 3115 3170 3350 3450<br />
16 17 24 17 19<br />
70 53 67 67/80 67/80<br />
8321 0201 81 8321 0102 02 8321 0104 27 8321 0201 85 8321 0201 69<br />
87<br />
HandHeld<br />
pneumatics
Rock drills<br />
Stopers<br />
Applications:<br />
• Raise driving and bolting<br />
• Screening<br />
Features:<br />
• High quality, designed for production drilling<br />
• Front flushing of drill steel to keep water and cuttings<br />
out from the drill (BBC 34)<br />
• Clock wise rotation for bolting (BBD 46 WR)<br />
See also Parts and Services Catalogue:<br />
• Accessories<br />
• Rock drill AIR OIL<br />
88<br />
Stopers BBD 46WS-6 BBD 46WS-8<br />
Hole range mm 27-41 27-41<br />
Weight kg 39 40<br />
Length retracted mm 1435 1650<br />
Length extracted mm 2205 2620<br />
Air consumption l/s 90 90<br />
Impact rate bpm 3000 3000<br />
Piston bore mm 75 75<br />
Stroke length mm 45 45<br />
Vibration level 3 axes (ISO 20643) 1) m/s² 10 10<br />
Sound power level guaranteed (2000/14/EC) 1) Lw, dB(A) 124 124<br />
Sound pressure level (ISO 11203) 1) Lp, r=1m 121 121<br />
Part number 8311 0202 03 8311 0202 11<br />
Data at 6 bar (90 psi) air pressure<br />
R=right rotation<br />
1) Important: Full details of measurement is available in the Safety and Operating Instruction<br />
of the product. It can be found on www.acprintshop.com.
BBD 46WR-6 BBD 46WR-8 BBC 34WS-6 BBC 34WS-8<br />
27-41 27-41 27-41 27-41<br />
39 40 45,5 46,5<br />
1435 1650 1610 1810<br />
2205 2620 2380 2780<br />
90 90 125 125<br />
3000 3000 2340 2340<br />
75 75 80 80<br />
45 45 70 70<br />
10 10 30,5 30,5<br />
124 124 129 129<br />
121 121 118 118<br />
8311 0202 29 8311 0202 37 8311 0104 03 8311 0104 04<br />
89<br />
HandHeld<br />
pneumatics
Rig-mounted pneumatic<br />
rock drills<br />
Applications:<br />
• Dimension stone industry (DSI)<br />
• Marble and granite quarries<br />
• Cable or chain feed drilling<br />
Features:<br />
• Noise-reduction (BBC 34 DSI)<br />
• Efficient air flushing<br />
• Can be converted to water flushing<br />
• production drilling<br />
See also Parts and Services Catalogue:<br />
• Accessories<br />
• Rock drill AIR-OIL<br />
90<br />
Rig-mounted rock drills BBD 94-DSI BBC 34-DSI<br />
Weight kg 26 31<br />
Length mm 670 775<br />
Air consumption l/s 97 88<br />
Impact rate bpm 3300 2280<br />
Piston bore mm 90 80<br />
Stroke length mm 45 70<br />
Vibration level 3 axes (ISO 20643) 1) m/s² 125 120<br />
Sound power level guaranteed (2000/14/EC) 1) Lw, dB(A) 114 109<br />
Sound pressure level (ISO 11203) 1) Lp, r=1m<br />
Part number 8311 0206 10 8311 0408 06<br />
1) Important: Full details of measurement are available in the Safety and Operating<br />
Instruction of the product (part no 9800 0669 71 & 9800 0829 71). It can be found on<br />
www.acprintshop.com
91<br />
HandHeld<br />
pneumatics
Handheld hydraulics<br />
Small and light<br />
<strong>Construction</strong> and rental companies around the world<br />
are discovering the advantages of using hydraulics. They<br />
know that hydraulic equipment offers the best power-toweight<br />
ratio of any system. And they appreciate that a<br />
hydraulic power pack is so small and light that two people<br />
can lift one up and fit it in the back of a van.<br />
Smaller construction and rental companies have been<br />
quick to understand the very real cost advantage of<br />
hydraulics. For the price of one compressor/breaker combination,<br />
you can buy two complete hydraulic power pack/<br />
breaker sets. In fact, you might not need a power pack at<br />
all: with the help of an oil flow divider and an extension<br />
hose, you can hook hydraulic tools directly to a hydraulicpowered<br />
carrier. Hydraulic power packs are a flexible<br />
power source: use them to power cut-off saws, core<br />
drills, submersible pumps and many other tools. You can<br />
use hydraulic tools anywhere, independent of electric or<br />
pneumatic supply. With no exhaust, you can put them to<br />
work indoors and out. And they can be used whether it’s<br />
hot or cold, dusty or wet or even underwater.<br />
Easy to own<br />
There’s not much that can go wrong with an <strong>Atlas</strong> <strong>Copco</strong><br />
hydraulic tool. With just two moving parts, lubricated<br />
continously by the hydraulic oil, there’s minimal wear and<br />
very few parts to replace. Hydraulics are by nature reliable:<br />
Working in a closed loop, dirt and moisture are kept<br />
out. And with the no-spill, flat-face couplings, it’s easy to<br />
keep the system clean and to ensure correct connection.<br />
92
93<br />
HandHeld<br />
Hydraulics
Hydraulic power packs<br />
Features:<br />
• Portable, compact and light weight<br />
• High efficiency, low noise and low fuel<br />
consumption thanks to Power On Demand function<br />
(available with selected models only)<br />
• Low maintanance, long lifetime – moving parts move<br />
in a closed lubricated circuit<br />
• Protective steel frame with foldable handles<br />
• Lifting eye and cross lifting bar<br />
• No exhaust or emission from the tools – power pack<br />
with engine can be placed away from tool<br />
• Large return filter and replacement indicator<br />
• Thermostatically-controlled oil cooler<br />
See also Parts and Services Catalogue:<br />
• Power Pack BIO-OIL<br />
• Oil flow dividers<br />
• Extension hoses<br />
Power packs Petrol driven<br />
LP 9-20 P 2) LP 13-30 P 2) LP 18-30 PE LP 18-40 PE<br />
Engine<br />
9 HP<br />
Honda petrol<br />
18 HP 18 HP<br />
13 HP<br />
B&S Vanguard B&S Vanguard<br />
Honda petrol<br />
petrol petrol<br />
Weight (incl oil) kg 72 91 118 118<br />
Dimensions (LxWxH) mm 710x525x585 745x600x705 790x605x690 790x605x690<br />
Oil flow l/min 20 20-30 20-30 20-40<br />
Maximum pressure bar 150 150 170 145<br />
Fuel capacity l 6 6,5 7,2 7,2<br />
Hose included YES YES NO NO<br />
Power on Demand (POD) YES YES NO NO<br />
Oil control: engine oil YES YES YES YES<br />
Electric start NO NO YES YES<br />
Sound power level<br />
guaranteed (2000/14/EC) 3) Lw, dB(A) 101 101 101 101<br />
Sound pressure level<br />
(ISO 11203) 3) Lp, r=1m 88 89 99 99<br />
EHTMA class C C/D C/D C/D/E<br />
Part number 1807 0080 09 1807 0110 12 1807 0160 41 1807 0160 38<br />
Part number 1) 1807 0080 31 1807 0110 23 - 1807 0160 40<br />
1) Non CE noise approved version<br />
2) 7 m extension twin-hose comes as standard with LP 9-20 P and LP 13-30 P<br />
94
Petrol Diesel driven Electric driven<br />
LP 18 Twin PE LP 13-20 DEL LP 9-20 E LP 18-30 E LP 18-40 E LP 18 Twin E<br />
18 HP<br />
B&S Vanguard<br />
petrol<br />
10 HP<br />
Lombardini<br />
diesel<br />
5,5 kW / 3x400<br />
V / 16A<br />
Electric<br />
11 kW /<br />
3x400 V / 32A<br />
Electric<br />
11 kW /<br />
3x400 V / 32A<br />
Electric<br />
3) Important: Full details of measurement is available in the Safety and Operating<br />
Instruction of the product. It can be found on www.acprintshop.com<br />
11 kW /<br />
3x400 V / 32A<br />
Electric<br />
111 116 70 130 130 123<br />
755x700x720 745x600x705 610x525x585 815x605x690 815x605x690 745x605x705<br />
2x20/1x40 20 20 30 40 2x20/1x40<br />
145 150 150 172 155 155<br />
7,2 5,5 - - - -<br />
NO NO NO NO NO NO<br />
YES NO NO NO NO NO<br />
YES NO NO NO NO NO<br />
YES YES YES YES YES YES<br />
101 - 101 101 101 101<br />
88 - 79 86 86 86<br />
C/E C C D E C/E<br />
1807 0160 16 - 1807 0080 15 1807 0160 43 1807 0160 42 1807 0160 22<br />
1807 0160 32 1807 0110 20 - - - -<br />
95<br />
HandHeld<br />
Hydraulics
Hydraulic standard hammer<br />
and breakers<br />
Applications:<br />
• Breaking light concrete and brickwork<br />
(LH 11)<br />
• Medium and hard materials as<br />
asphalt and concrete<br />
Features:<br />
• Low noise levels<br />
• Slim design<br />
• High power to weight ratio<br />
• High back pressure (HBP) versions for skid steer<br />
connections<br />
See also Parts and Services Catalogue:<br />
• Working <strong>Tools</strong><br />
• Chisel paste<br />
• Oil flow dividers<br />
• Extension hoses<br />
1) Weights for LH 180 with Hex 25, LH 220, LH 270, LH 390 with Hex 32.<br />
2) Lengths for LH 180 with Hex 25, LH 220, LH 270, LH 390 with Hex 32<br />
96<br />
LH 11<br />
Pick hammer<br />
Hammer and breakers LH 11 4) LH 180<br />
Weight 1) kg 15,5 19,5<br />
Length 2) mm 650 650<br />
Oil flow l/min 20 20<br />
Working pressure bar 80-100 95-110<br />
Max back pressure bar 10 10<br />
Impact rate blows/min 2300 1400<br />
Vibration level 3 axes (ISO 20643) 2) 3) m/s² 16,5 -<br />
Sound power level guaranteed (2000/14/EC) 3) Lw, dB(A) 105 107<br />
Sound pressure level (ISO 11203) 3) Lp, r=1m 93 93<br />
EHTMA class C C<br />
Part number LH 11 LH 180<br />
Hex 22x82,5 1801 1741 18 -<br />
Hex 25x108 - 1801 3443 36<br />
Hex 28x152 - 1801 3443 37<br />
Hex 28x160 - 1801 3443 38<br />
Hex 32x152 - 1801 3443 39<br />
Hex 32x160 - 1801 3443 40
LH 220 LH 220 HBP 5) LH 270 LH 270 HBP 5) LH 390 LH 390 HBP 5)<br />
22,5 22,5 26,5 26,5 33 33<br />
690 690 765 765 765 765<br />
20-30 20-30 20-30 20-30 30-40 30<br />
125 115-130 110-125 115-130 110-125 115-130<br />
15 35 15 35 15 20<br />
1500-2100 1500-2100 1350-1750 1350-1750 1150-1600 1150-1600<br />
- - - - - -<br />
107 107 110 110 106 106<br />
94 94 95 95 93 93<br />
C/D C/D C/D C/D D/E D<br />
LH 220 LH 220 HBP LH 270 LH 270 HBP LH 390 LH 390 HBP<br />
- - - - - -<br />
1801 3543 46 1801 3546 87 - - - -<br />
1801 3543 47 1801 3546 88 1801 3643 56 1801 3646 97 1801 3743 64 1801 3647 05<br />
1801 3543 48 1801 3546 89 1801 3643 57 1801 3646 98 1801 3743 65 1801 3647 06<br />
1801 3543 49 1801 3546 90 1801 3643 58 1801 3646 99 1801 3743 66 1801 3647 07<br />
1801 3543 50 1801 3546 91 1801 3643 59 1801 3647 00 1801 3743 67 1801 3647 08<br />
3) Important: Full details of measurement are available in the Safety and Operating Instruction<br />
of the product (part no 3392 5206 90). It can be found on www.acprintshop.com<br />
4) Front handle as option<br />
5) HBP: High Back Pressure<br />
97<br />
HandHeld<br />
Hydraulics
Hydraulic vibro-reduced<br />
breakers<br />
Applications:<br />
• Medium and hard materials as<br />
asphalt and concrete<br />
Features:<br />
• Vibro-reduction<br />
• Vibro-damping chisel bushing<br />
• Low noise levels<br />
• Slim design<br />
• High power to weight ratio<br />
• High back pressure (HBP) versions for skid steer<br />
connections<br />
See also Parts and Services Catalogue:<br />
• Working <strong>Tools</strong><br />
• Chisel paste<br />
• Oil flow dividers<br />
• Extension hoses<br />
Breakers LH 190 E<br />
Weight 1) kg 25<br />
Length 2) mm 650<br />
Oil flow l/min 20<br />
Working pressure bar 95-110<br />
Return line pressure max bar 10<br />
Impact rate blows/min 1400<br />
Vibration level 3 axes (ISO 20643) 2) 3) m/s² -<br />
Sound power level guaranteed (2000/14/EC) 3) Lw, dB(A) 107<br />
Sound pressure level (ISO 11203) 3) Lp, r=1m 93<br />
EHTMA class C<br />
Part number LH 190 E<br />
Hex 22x82,5 -<br />
Hex 25x108 1801 3443 41<br />
Hex 28x152 1801 3443 42<br />
Hex 28x160 1801 3443 43<br />
Hex 32x152 1801 3443 44<br />
Hex 32x160 1801 3443 45<br />
1) LH 190 E with Hex 25, LH 230 E, LH 280 E and LH 400 E with Hex 32.<br />
2) Lengths for LH 190 E with Hex 25, LH 230 E, LH 280 E, LH 400 E with Hex 32<br />
98
LH 230 E LH 230 E HBP 4) LH 280 E LH 280 E HBP 4) LH 400 E LH 400 E HBP 4)<br />
28 28 32,5 32,5 39 39<br />
735 735 765 765 765 765<br />
20-30 20-30 20-30 20-30 30-40 30<br />
105-125 115-130 110-125 115-130 110-125 115-130<br />
15 35 15 35 15 20<br />
1500-2100 1500-2100 1350-1750 1350-1750 1150-1600 1150-1600<br />
- - - - - -<br />
107 107 110 110 106 106<br />
94 94 95 95 93 93<br />
C/D C/D C/D C/D D/E D<br />
LH 230 E LH 230 E HBP LH 280 E LH 280 E HBP LH 400 E LH 400 E HBP<br />
- - - - - -<br />
1801 3543 51 1801 3546 92 - - - -<br />
1801 3543 52 1801 3546 93 1801 3643 60 1801 3647 01 1801 3743 68 1801 3647 09<br />
1801 3543 53 1801 3546 94 1801 3643 61 1801 3647 02 1801 3743 69 1801 3647 10<br />
1801 3543 54 1801 3546 95 1801 3643 62 1801 3647 03 1801 3743 70 1801 3647 11<br />
1801 3543 17 1801 3546 96 1801 3643 63 1801 3647 04 1801 3743 71 1801 3647 12<br />
3) Important: Full details of measurement are available in the Safety and Operating Instruction<br />
of the product (part no 3392 5206 90). It can be found on www.acprintshop.com<br />
4) HBP: High Back Pressure<br />
99<br />
HandHeld<br />
Hydraulics
Hydraulic rock drill<br />
Applications:<br />
• Drills down to 6 m depth and<br />
up to 50 mm diameter:<br />
• Blast holes<br />
• Anchor holes<br />
• Rock-splitting holes<br />
Features:<br />
• Torque limiter prevents operator kick-back<br />
• Anticlockwise rotation as option<br />
• A drifter version for separate operation of<br />
impact and two way rotation is available.<br />
See also Parts and Services Catalogue:<br />
• Oil flow dividers<br />
• Extension hoses<br />
Rock drill LHD 23 M<br />
Shank size Hex mm 22x108<br />
Weight including hoses kg 26<br />
Service weight kg 28,5<br />
Oil flow l/min 20-25<br />
Working pressure bar 100-140<br />
Max back pressure bar 15<br />
Impact rate 1) blows/min 2550<br />
Revolutions rpm 320-400<br />
Torque Nm 65<br />
Vibration level 3 axes (ISO 20643) 2) m/s² 11,7<br />
Sound power level guaranteed (2000/14/EC) 2) Lw, dB(A) 115<br />
Sound pressure level (ISO 11203) 2) Lp, r=1m 104<br />
EHTMA class C<br />
Part number, clockwise rotation 1801 3800 01<br />
Part number, CCW rotation 1801 3800 02<br />
1) At 25 l/min.<br />
2) Important: Full details of measurement is available in the Safety and Operating Instruction<br />
of the product (part no 3392 5013 01). It can be found on www.acprintshop.com<br />
100
Hydraulic pumps<br />
Applications:<br />
Pumping of clean or<br />
contaminated water and slurry:<br />
• On building sites<br />
• In flooded excavations<br />
• In cellars<br />
• In wells<br />
Features:<br />
• Spark proof motor<br />
• Can run dry<br />
• Including 10 m discharge hose<br />
with quick coupling<br />
See also Parts and Services Catalogue:<br />
• Oil flow dividers<br />
• Extension hoses<br />
Water pumps LWP 2 LTP 3<br />
Weight kg 11 13<br />
Width mm 225 300<br />
Oil flow l/min 18-24 26-38<br />
Working pressure bar 100 140<br />
Max working Pressure bar 160 172<br />
Pump head max m 25 32<br />
Pump flow max l/min 840 1920<br />
Discharge 2" 3"<br />
Solids handling up to mm 10 60<br />
EHTMA class C D<br />
Part number 1806 1014 34 1806 1014 35<br />
101<br />
HandHeld<br />
Hydraulics
Hydraulic<br />
core drills<br />
Applications:<br />
• Safe handheld drilling in reinforced concrete and<br />
asphalt up to 200 mm diameter in confined spaces, for<br />
ventilation, heating, gas piping and other installations<br />
• Works efficient also in underwater applications<br />
Features:<br />
• High power to weight ratio<br />
• Low vibrations<br />
• Low kick-back<br />
• Hydraulic torque control<br />
• Fits in standard drill stands<br />
• Closed hydraulic circuit<br />
• Comes in carrying steel case as standard<br />
See also Parts and Services Catalogue:<br />
• Diamond core bits<br />
• Oil flow dividers<br />
• Extension hoses<br />
• Water kit<br />
Core drills LCD 500 LCD 1500<br />
Weight including hoses kg 9,5 9<br />
Oil flow rate l/min 20-30 20-30<br />
Length without drill mm 414 406<br />
Working pressure bar 80-172 80-172<br />
Revolutions rpm 600-900 1500-2250<br />
Drill diameter mm 50-202 12-75<br />
Thread female (drive) 1) ½" BSP ½" BSP<br />
Vibration level 3 axes (ISO 28927-5) 2) m/s² 3,1 2,7<br />
Sound pressure level (ISO 11203) 2) Lp, r=1m
Hydraulic cut-off saws<br />
Applications:<br />
• Cuts 133-160 mm depth<br />
• Works in dust, slurry and<br />
underwater<br />
• Used for cutting:<br />
• Concrete, reinforced concrete<br />
• Asphalt<br />
• Steel<br />
• Used with:<br />
• Dry and wet diamond discs<br />
• Abrasive steel cutting discs<br />
Features:<br />
• Simple design with direct drive motor<br />
• Open visible cutting face<br />
• High power-to-weight ratio<br />
• Compact and slim design<br />
See also Parts and Services Catalogue:<br />
• Diamond discs<br />
• Oil flow dividers<br />
• Extension hoses<br />
• Water kit<br />
• Cart<br />
Cut-off saws LS 14 LS 16<br />
Weight including hoses kg 12 13<br />
Oil flow l/min 20-30 20-40<br />
Max oil pressure bar 170 170<br />
Revolutions rpm 2500-4000 2000-4000<br />
Speed m/s 46-75 42-85<br />
Disc size mm 355 405<br />
Arbor size mm 25,4 25,4<br />
Cutting depth mm 133 160<br />
Vibration level 3 axes (ISO 20643) 1) m/s² 4,9 4,9<br />
Sound power level guaranteed (2000/14/EC) 1) Lw, dB(A) 99 115<br />
Sound pressure level (ISO 11203) 1) Lp, r=1m 86 102<br />
EHTMA class C/D C/D/E<br />
Part number 1809 0140 01 1809 0160 00<br />
1) Important: Full details of measurement is available in the Safety and Operating Instruction<br />
of the product (part no 3392 5042 90). It can be found on www.acprintshop.com<br />
103<br />
HandHeld<br />
Hydraulics
Hydraulic post drivers<br />
Applications:<br />
• Drives up to 96 mm diameter poles<br />
• For driving of:<br />
• Road barriers<br />
• Tubes / profiles<br />
• Signposts<br />
• Fences<br />
• Anchors<br />
Features:<br />
• Available with built in on/off valve or<br />
hose mounted remote on/off valve<br />
See also Parts and Services Catalogue:<br />
• Oil flow dividers<br />
• Extension hoses<br />
• Post driver adaptors<br />
Post drivers LPD-T HBP LPD-RV HBP<br />
Activation type By trigger lever By remote valve<br />
Hydraulic system Open centre<br />
Open- or closedcentre<br />
Weight including hoses kg 32 33<br />
Service weight with adaptor kg 34 34,5<br />
Working pressure bar 105-140 105-140<br />
Oil flow l/min 20-30 20-30<br />
Impact rate at 30 l/min blows/min 1680 1680<br />
Hydraulic ports ½" BSP ½" BSP<br />
Vibration level 3 axes (ISO 20643) 1) m/s² 12,8 -<br />
Sound power level guaranteed (2000/14/EC) Lw, dB(A) 115 115<br />
Sound pressure level (ISO 11203) 1) Lp, r=1m 102 102<br />
EHTMA class C/D C/D<br />
Part number 1801 4040 02 1801 4050 02<br />
1) Important: Full details of measurement is available in the Safety and Operating Instruction<br />
of the product. It can be found on www.acprintshop.com.<br />
104
Hydraulic post puller<br />
Applications:<br />
• For removal of any pole, steel beam or<br />
tube with diameters up to 200 mm<br />
• For removing of:<br />
• Wooden posts<br />
• Steel posts (incl IPE, HPE and UPE profile)<br />
• Round/square steel tubes<br />
• Fence posts<br />
• Anchors<br />
Features:<br />
• Integrated jaw<br />
• Automatic chain tightening clamp<br />
• Total pulling force up to 10 tons<br />
See also Parts and Services Catalogue:<br />
• Oil flow dividers<br />
• Extension hoses<br />
• Lever kit<br />
Post puller LPP 10 HD<br />
Weight kg 60<br />
Oil flow l/min 20-40<br />
Max. working pressure bar 172<br />
Max. back pressure bar 30<br />
Lift capacity per stroke mm 12-200<br />
Pulling force kg 6000<br />
Full pulling force 1) kg 10000<br />
EHTMA class C/D/E<br />
Part number 1801 8100 03<br />
1) Lever kit, part number 3371 8101 48<br />
105<br />
HandHeld<br />
Hydraulics
Hydraulic ground rod<br />
drivers<br />
Applications:<br />
• Drives earth connectors to depths of<br />
10-15 m<br />
• Light fencing and spike/anchor driving<br />
Features:<br />
• Standard chuck sizes for up to 16 mm and 25 mm rods<br />
• Hose mounted on/off valve for easy driving of long<br />
rods<br />
See also Parts and Services Catalogue:<br />
• Oil flow dividers<br />
• Extension hoses<br />
Ground rod drivers LGRD-RV 16 LGRD-RV 25<br />
Weight with hoses, control valve kg 23 23<br />
Max working pressure bar 105-125 105-125<br />
Oil flow l/min 20-30 20-30<br />
Impact rate at 30 l/min blows/min 1600 1600<br />
Hydraulic ports ½" BSP ½" BSP<br />
Bushing diameter mm 16 25<br />
Vibration level 3 axes (ISO 20643) 1) m/s² 17,4 17,4<br />
Sound power level guaranteed (2000/14/EC) 1) Lw, dB(A) 110 110<br />
Sound pressure level (ISO 11203) 1) Lp, r=1m 99 99<br />
EHTMA class C/D C/D<br />
Part number 1801 3940 01 1801 3940 00<br />
1) Important: Full details of measurement is available in the Safety and Operating Instruction<br />
of the product (part no 3392 5007 01). It can be found on www.acprintshop.com<br />
106
Hydraulic posthole borer<br />
Handheld and<br />
rig-mounted<br />
Applications:<br />
• Drilling preparations for:<br />
• Fence posts<br />
• Planting holes<br />
• Signpost holes<br />
• Drilling depth down<br />
to 1,5 m<br />
Features LPHB:<br />
• Two way rotation – ideal<br />
in stony ground<br />
• Adjustable rotation<br />
speed and torque limiter<br />
• Quick change of auger<br />
without any tools<br />
See also Parts and<br />
Services Catalogue:<br />
• Oil flow dividers<br />
• Extension hoses<br />
• Augers<br />
• Extension rod<br />
LPHB LPHB-M<br />
Features LPHB-M:<br />
• Standard ½” BSP<br />
connection<br />
• Quick change of auger<br />
without any tools<br />
Handheld post hole borer LPHB LPHB-M<br />
Weight kg 20 31 1)<br />
Oil flow l/min 15-30 20-60<br />
Working pressure bar 100-140 160<br />
Max back pressure bar 50 -<br />
Torque Nm 315 450 2)<br />
Speed of rotation rpm 90-188 80-200<br />
Auger size at L=870 mm 90-350 -<br />
Vibration level 3 axes (ISO 20643) 3) m/s² 7,4<br />
Sound pressure level (ISO 11203) 3) Lp, r=1m
Petrol breakers/drills<br />
Applications:<br />
• Drilling and breaking<br />
(Cobra Combi,<br />
pionjär 120)<br />
• Work on remote sites<br />
• Breaking concrete<br />
• Cutting asphalt<br />
• tamping and compacting<br />
• Driving spikes, tubes,<br />
poles, ground rods and<br />
probes<br />
• Digging ditches and holes<br />
• tie tamping<br />
Features:<br />
• Easy to transport<br />
• Quick set-up time<br />
• HapS Hand and arm<br />
protection System (not<br />
pionjär)<br />
• low emissions<br />
• low noise<br />
Petrol breakers/drills Cobra Pro Cobra TT<br />
Weight kg 25 25<br />
Length mm 927 927<br />
Impact energy Joules 60 40<br />
Impact rate blows/min 1440 1620<br />
Engine power kW 2 1,5<br />
Fuel capacity l 1 1<br />
Vibration level 3 axes (ISO 20643) 2) m/s² 4,3 4,5<br />
Sound power level guaranteed (2000/14/EC) 2) Lw, dB(A) 109 109<br />
Sound pressure level (ISO 11203) 2) Lp, r=1m 96 96<br />
Available shank sizes<br />
22x108 Part number<br />
Cobra Pro and TT<br />
• adjustable handles<br />
• Central lubrication<br />
• High impact power<br />
Cobra Pro, TT and<br />
Combi<br />
• Catalytic converter for<br />
low emission<br />
Pionjär<br />
• Ideal for high altitude<br />
operations<br />
See also Parts and Services<br />
Catalogue:<br />
• Cobra & Compactor<br />
ImpaCt-OIl<br />
• 2-stroke OIl<br />
32X160 Part number 8318 0700 35 8318 0700 43<br />
32X160 Cobra TT-AWD 8318 0700 51<br />
32X152 Part number 8318 0700 37 8318 0700 45<br />
28X160 Part number 8318 0700 39 8318 0700 47<br />
28X152 Part number 8318 0700 41 8318 0700 49<br />
1) Pionjär is not sold within the EU<br />
108
Cobra Combi Pionjär 120 1) Pionjär 130 1)<br />
25 27 25<br />
732 730 700<br />
22-25 22-25 22-25<br />
2700 2600 2600<br />
2 2 2<br />
1,2 1,1 1,1<br />
5,8 (breaking)<br />
9,3 (drilling)<br />
Cobra Combi<br />
for drilling and<br />
breaking<br />
Cobra Pro/TT<br />
for breaking and<br />
tamping<br />
- -<br />
108 - -<br />
95 101 101<br />
8318 0800 08 8318 0326 07 8318 0328 05<br />
2) Important: Full details of measurement are available in the Safety and Operating Instruction<br />
of the product (part no 9800 0956 90 (Cobra Pro/TT), 9800 0955 90 (Cobra Combi) ).<br />
They can be found on www.acprintshop.com<br />
109<br />
handheld<br />
Petrol
Hydraulic breakers<br />
Solid Body concept<br />
The Solid Body concept integrates the percussion<br />
mechanism and guide system into one single block<br />
of steel. This unique design makes the SB breakers<br />
extremely compact and easy to handle. The Solid Body<br />
concept is standard for all breakers in the SB range.<br />
VibroSilenced Plus system<br />
The VibroSilenced Plus system is a highly efficient<br />
arrangement of damping elements which acoustically<br />
insulates the percussion mechanism from the breaker<br />
box guide system. Thanks to this concept, <strong>Atlas</strong> <strong>Copco</strong><br />
breakers are among the quietest on the market. This<br />
has been proven by measurements based on Directive<br />
2000/14/EC. Moreover, the VibroSilenced Plus system<br />
helps to minimize the level of vibration to which the<br />
carrier and its operator are exposed.<br />
DustProtector II<br />
The DustProtector II is a unique two-stage sealing<br />
system, helping to reduce the penetration of rock dust<br />
and debris into the lower breaker section. Operations<br />
can be more long-term and trouble-free, especially under<br />
very dusty working conditions. This unique, protective<br />
feature is available on all MB & HB hydraulic breakers.<br />
All breakers in the SB range are protected by a dust<br />
protection ring.<br />
ContiLube II<br />
The automatic lubrication system offers an optimal and<br />
cost-effective lubrication. It is a fixed component that is<br />
directly attached to the breaker, working autonomously<br />
and easily accessible without long hose connections. All<br />
connection ports are protected in the breaker housing.<br />
The filling level of the cartridge can always be monitored<br />
by the operator since its position on the breaker is within<br />
his field of vision. All breakers of the MB and HB series<br />
are equipped with ContiLube II as standard. SB breakers<br />
can be equipped with ContiLube II micro (option)<br />
110
AutoControl<br />
AutoControl helps to boost the performance of <strong>Atlas</strong><br />
<strong>Copco</strong> breakers. The system automatically controls the<br />
breaker output to suit the working conditions and rock<br />
hardness, thereby creating a highly effective tool for<br />
users: maximum blow frequency for soft materials and<br />
maximum single-blow energy when things get tougher.<br />
Standard for breakers from MB 1000 upwards and all HB<br />
breakers.<br />
StartSelect<br />
The StartSelect system comprises two functions for start<br />
and stop which allow the start-up and shut-off behaviour<br />
of the breaker to be set in line with the actual working<br />
conditions: the AutoStart mode for jobs in unstable<br />
ground, the AutoStop mode for jobs on firm grounds.<br />
This allows the operator to work extremely efficient.<br />
StartSelect is standard from MB 1200 upwards and on<br />
all HB breakers.<br />
PowerAdapt<br />
Since excessive oil pressure is extremely damaging for a<br />
hydraulic breaker, PowerAdapt helps to prevent overloads<br />
by switching off the attachment, thereby reducing<br />
downtimes and repair costs. PowerAdapt is standard<br />
for all HB breakers. All breakers in the SB range are<br />
protected by an overload protection valve.<br />
111<br />
rig-mounted<br />
breakers
Light hydraulic breakers<br />
55-520 kg<br />
Applications:<br />
• Road construction<br />
• Smaller trenching and demolition jobs<br />
• Building renovation<br />
• Landscaping<br />
• Boulder size reduction in quarries<br />
Features:<br />
• Energy Recovery<br />
• Solid Body concept<br />
• Noise reduction<br />
• Dust protection<br />
• Overload protection valve<br />
• Double tool retainer bars<br />
• Integrated maintenance free accumulator<br />
Option:<br />
• ContiLube II micro<br />
See also Parts and Services Catalogue:<br />
• Warranty extension 1+2 program<br />
• Working tools<br />
• Lubricants<br />
• Maintenance kits<br />
• Connection hoses<br />
Light hydraulic breakers SB 52 SB 102<br />
Carrier weight class 1) t 0,7-1,1 1,1–3,0<br />
Service weight 2) kg 55 90<br />
Oil flow l/min 12-27 16-35<br />
Operating pressure bar 100-150 100-150<br />
Impact rate bpm 750-1700 750-2300<br />
Working tool diameter mm 40 45<br />
Working length of tool mm 255 250<br />
Max. hydr. input power kW 7 9<br />
Start up mode AutoStart AutoStart<br />
Sound power level guaranteed 3) dB(A) 117 115<br />
Sound pressure level (r=10m) 3) dB(A) 89 87<br />
Part number 8460 0300 10 8460 0300 30<br />
1) Weights apply to standard carriers only. Any variances must be agreed<br />
with <strong>Atlas</strong> <strong>Copco</strong> and/or the carrier manufacturer prior to attachment.<br />
2) Breaker with standard adapter plus working tool and screw kit.<br />
112
SB 152 SB 202 SB 302 SB 452 SB 552<br />
1,9–4,5 2,5–6,0 4,5–9,0 6,5-13 9,0-15,0<br />
140 200 300 440 520<br />
25-45 35-65 50-80 55-100 65-115<br />
100-150 100-150 100-150 100-150 100-150<br />
850-1900 850-1800 600-1400 550-1250 660-1150<br />
50 65 80 95 100<br />
250 300 440 470 475<br />
11 17 20 25 29<br />
AutoStart AutoStart AutoStart AutoStart AutoStart<br />
114 118 119 122 126<br />
85 90 91 94 97<br />
8460 0300 40 8460 0300 50 8460 0300 60 8460 0300 70 8460 0300 80<br />
3) Important: EN ISO 3744 in accordance with directive 2000/14/EC. Full details of<br />
measurement are available in the Safety and Operating Instruction of the product<br />
(part no 9800 0648 90). It can be found on www.acprintshop.com<br />
113<br />
rig-mounted<br />
breakers
medium hydraulic breakers<br />
750-1700 kg<br />
Applications:<br />
• Demoltion<br />
• Foundation work<br />
• Tunnelling<br />
• Trenching<br />
• Underwater work<br />
• Boulder size reduction in<br />
quarries<br />
Features:<br />
• VibroSilenced Plus<br />
system<br />
• ContiLube II<br />
• Energy Recovery<br />
• AutoControl (MB 1000<br />
upwards)<br />
• StartSelect<br />
(MB 1200 upwards)<br />
• Percussion chamber<br />
ventilation<br />
1) Weights apply to standard carriers only. Any variances must be agreed with <strong>Atlas</strong> <strong>Copco</strong><br />
and/or the carrier manufacturer prior to attachment.<br />
2) Breaker and breaker box with standard adapter plus working tool and screw kit.<br />
114<br />
Options:<br />
• DustProtector II<br />
• Installation kit for<br />
underwater applications<br />
• Hydraulic compressor &<br />
installation kit for tunnel<br />
applications<br />
See also Parts and<br />
Services Catalogue:<br />
• Warranty extension<br />
1+2 program<br />
• Working tools<br />
• Lubricants<br />
• Maintenance kits<br />
• Connection hoses<br />
Medium hydraulic breakers MB 750<br />
Carrier weight class 1) t 10-17<br />
Service weight 2) kg 750<br />
Oil flow l/min 80-120<br />
Operating pressure bar 140-170<br />
Impact rate bpm 370-840<br />
Start-up mode AutoStart<br />
Working tool diameter mm 100<br />
Working length of tool mm 550<br />
Max. hydraulic input power kW 34<br />
Sound power level guaranteed 3) dB(A) 117<br />
Sound pressure level (r=10m) 3) dB(A) 88<br />
Part number 3363 1007 39<br />
Equipped with DustProtector II<br />
Working length of tool mm 510<br />
Part number 3363 1046 81
MB 1000 MB 1200 MB 1500 MB 1700<br />
12-21 15-26 17-29 19-32<br />
1000 1200 1500 1700<br />
85-130 100-140 120-155 130-170<br />
160-180 160-180 160-180 160-180<br />
350-750 340-680 330-680 320-640<br />
AutoStart StartSelect StartSelect StartSelect<br />
110 120 135 140<br />
570 610 630 650<br />
39 42 46 51<br />
119 117 120 117<br />
90 88 91 87<br />
3363 0887 85 3363 0904 41 3363 0991 01 3363 0904 49<br />
540 585 605 620<br />
3363 0887 87 3363 0904 43 3363 0991 39 3363 0904 51<br />
3) Important: EN ISO 3744 in accordance with directive 2000/14/EC.<br />
Full details of measurement are available in the Safety and Operating Instruction of the product.<br />
It can be found on www.acprintshop.com<br />
115<br />
rig-mounted<br />
breakers
Heavy hydraulic breakers<br />
2000-10000 kg<br />
Applications:<br />
• Demoltion<br />
• Foundation work<br />
• Tunneling<br />
• Trenching<br />
• Underwater work<br />
• Boulder size reduction in<br />
quarries<br />
• Blast-free mining<br />
Features:<br />
• VibroSilenced Plus<br />
system<br />
• ContiLube II<br />
• Energy Recovery<br />
• AutoControl<br />
• StartSelect<br />
• PowerAdapt<br />
• Percussion chamber<br />
ventilation<br />
116<br />
Options:<br />
• DustProtector II<br />
• Installation kit for<br />
underwater applications<br />
• Hydraulic compressor &<br />
installation kit for tunnel<br />
applications<br />
See also Parts and<br />
Services Catalogue:<br />
• Warranty extension<br />
1+2 program<br />
• Working tools<br />
• Lubricants<br />
• Maintenance kits<br />
• Connection hoses<br />
Heavy hydraulic breakers HB 2000 HB 2500 HB 3100<br />
Carrier weight class 1) t 22-38 27-46 32-52<br />
Service weight 2) kg 2000 2500 3100<br />
Oil flow l/min 150-190 170-220 210-270<br />
Operating pressure bar 160-180 160-180 160-180<br />
Impact rate bpm 300-625 280-580 280-560<br />
Working tool diameter mm 145 155 165<br />
Working length of tool mm 665 680 745<br />
Max. hydraulic input power kW 57 66 81<br />
Sound power level guaranteed 3) dB(A) 120 121 119<br />
Sound pressure level (r=10m) 3) dB(A) 91 92 90<br />
Part number 3363 1027 61 3363 0926 91 3363 1056 51<br />
Equipped with DustProtector II<br />
Working length of tool mm 600 640 700<br />
Part number 3363 1044 17 3363 0938 71 3363 1056 49<br />
1) Weights apply to standard carriers only. Any variances must be agreed with <strong>Atlas</strong> <strong>Copco</strong><br />
and/or the carrier manufacturer prior to attachment.<br />
2) Breaker and breaker box with standard adapter plus working tool.
HB 3600 HB 4700 HB 5800 HB 7000 HB 10000<br />
35-63 45-80 58-100 70-120 85-140<br />
3600 4700 5800 7000 10000<br />
240-300 260-360 310-390 360-450 450-530<br />
160-180 160-180 160-180 160-180 160-180<br />
280-560 280-540 280-480 280-450 250-380<br />
170 190 200 210 240<br />
770 860 865 935 -<br />
90 108 117 135 159<br />
121 126 121 121 123<br />
92 96 92 92 93<br />
3363 1003 01 3363 1027 51 3363 0904 73 3363 0904 81<br />
720 800 810 885 880<br />
3363 1007 79 3363 1044 61 3363 0904 75 3363 0904 83 3363 1003 91<br />
3) Important: EN ISO 3744 in accordance with directive 2000/14/EC.<br />
Full details of measurement are available in the Safety and Operating Instruction of the product.<br />
Can be found on www.acprintshop.com<br />
117<br />
rig-mounted<br />
breakers
Hydraulic compactors<br />
Applications:<br />
• Trench and soil compaction<br />
• Driving sheeting and pilings<br />
• Extracting<br />
Features:<br />
• Plug and play – no special installation required<br />
• Integrated input flow and pressure control to prevent<br />
overload<br />
• Flat top mounting base for versability<br />
• Practically maintanance free thanks to PermanentLube,<br />
the permanent bearing lubrication device<br />
• Removeable base plate (from HC 920 upwards)<br />
Option:<br />
• Rotation kits (HC 308–HC 2041)<br />
See also Parts and Services Catalogue:<br />
• Lubricants<br />
• Connection hoses<br />
• Maintenance kits<br />
Hydraulic compactors HC 103 HC 308<br />
Carrier weight class 1) t 1-3 3-8<br />
Service weight kg 160 320<br />
Oil flow rate l/min 30 57<br />
Operating pressure bar 150 150<br />
Vibrating force t 1,4 2,3<br />
Vibrating frequency n/min 2100 2100<br />
Baseplate size (WxL) mm 346x678 475x693<br />
Plate coverage m² 0,19 0,25<br />
Height mm 486 623<br />
Part number 1826 1016 34 1826 1016 35<br />
1) Weights apply to standard carriers only. Any variances must be agreed with <strong>Atlas</strong> <strong>Copco</strong><br />
and/or the carrier manufacturer prior to attachment.<br />
118
HC 409 HC 920 HC 2040 HC 2041<br />
4-9 9-20 20-40 20-40<br />
430 880 1050 1055<br />
76 114 151 189<br />
150 150 150 150<br />
3,6 7,3 10,5 11,4<br />
2200 2200 2200 2200<br />
610x929 710x1178 864x1136 864x1136<br />
0,42 0,63 0,74 0,74<br />
622 764 786 786<br />
1826 1016 36 1826 1016 37 1826 1016 38 1826 1016 39<br />
119<br />
rig-mounted<br />
compactors
Silent demolition tools<br />
Extremely robust design<br />
<strong>Atlas</strong> <strong>Copco</strong> combi cutters and pulverizers are designed<br />
for hard and long-term use with high throughput<br />
performance and loads. They can absorb high forces and<br />
constant stresses.<br />
Hydraulic rotation<br />
360° hydraulic drives for infinite rotation with overload<br />
protection are fitted as standard and provide excellent<br />
handling. The CC 250 is equipped with a mechanical<br />
rotation unit.<br />
High speed valves<br />
Powerful cylinders with speed valves offer high breaking<br />
forces with short cycle times, thus enabling rapid progress<br />
and high productivity.<br />
Practical wear part concept<br />
All products are fitted with easy-to-replace wear parts<br />
which can be renewed on site using simple tools. This<br />
helps to minimize service and maintenance downtimes.<br />
Two moving jaws concept<br />
<strong>Atlas</strong> <strong>Copco</strong> combi cutters are equipped with the proven<br />
system of two moving jaws, each powerd by its own<br />
hydraulic cylinder. This offers constantly high breaking<br />
force over the entire breaking cycle.<br />
CAPS (Coupling And Positioning System)<br />
Thanks to CAPS, the two cutter jaws of <strong>Atlas</strong> <strong>Copco</strong><br />
combi cutters (from CC 1700 upwards) can be fitted and<br />
removed as a modular unit. CAPS connects the jaws<br />
even after they have been removed and facilitates refitting<br />
through a special guide system. This makes it easy to<br />
replace the jaws quickly on site.<br />
120
121<br />
rig-mounted<br />
cutterS
Scrap cutters<br />
Applications:<br />
• Cutting metal structures (girders, sheets,<br />
cables, rods)<br />
• Demolition work with mini-excavators or<br />
demolition robots inside buildings and in contaminated<br />
areas (chemical plants, atomic power<br />
plants)<br />
Features:<br />
• High cutting force along entire blade length<br />
• 360° hydraulic rotation<br />
• Short opening and closing times<br />
• Solid, extremely resistant components<br />
• Replaceable blades<br />
See also Parts and Services Catalogue:<br />
• Lubricants<br />
• Maintenance kits<br />
Scrap cutters SC 270 SC 600<br />
Carrier weight class 1) t 4-5 5,5-6,5<br />
Carrier weight class 1) 2) t 2-3 3,5-4,5<br />
Service weight 3) kg 385 645<br />
Max. cutting force t 102 138<br />
Cutting force, jaw tip t 36 46<br />
Oil flow rate l/min 60-100 90-120<br />
Operating pressure bar 250 300<br />
Oil flow rate, rotation l/min max. 15 max. 20<br />
Operating pressure, rotation bar 100 100<br />
Jaw opening, max mm 185 245<br />
Jaw depth mm 160 240<br />
Blade length mm 160 240<br />
Part number 8460 0100 10 3093 0400 62<br />
1) Weights apply to standard carriers only. Any variances must be agreed with <strong>Atlas</strong> <strong>Copco</strong><br />
and/or the carrier manufacturer prior to attachment. Mounted on excavator stick.<br />
2) Mounted on excavator boom.<br />
3) With medium-sized adapter.<br />
122
combi cutters<br />
240-920 kg<br />
Applications:<br />
• Light demolition work, e.g. narrow, lightly<br />
reinforced concrete elements, masonry<br />
• Particularly effective for stripping out and<br />
reconstructing interiors<br />
Features:<br />
• Good performance-to-weight ratio<br />
• 360° rotation<br />
• Replaceable blades<br />
See also Parts and Services Catalogue:<br />
• Lubricants<br />
• Maintenance kits<br />
Combi cutters CC 250 CC 650 CC 950 U<br />
Carrier weight class 1) t 2-4 5-14 9-16<br />
Service weight 2) kg 240 630 920<br />
Cutting force, upper blades, max. t 66 - -<br />
Cutting force, jaw tip t - - -<br />
Crushing force, jaw tip t 18 45 55<br />
Oil flow rate l/min 30-50 90-180 90-180<br />
Operating pressure bar 200 350 350<br />
Closing cycle 3) s 2,9 3,4 -<br />
Opening cycle 3) s 2,2 2,6 -<br />
Rotary drive mech. hydr. hydr.<br />
Oil flow, rotation, max. l/min - 25 25<br />
Operating pressure, rotation, max. bar - 210 210<br />
Jaw opening, max mm 360 450 650<br />
Jaw depth mm 350 270 330<br />
Blade length mm 120 140 140<br />
Part number 3093 0400 02 3363 1042 21 3363 1119 49<br />
1) Weights apply to standard carriers only. Any variances<br />
must be agreed with <strong>Atlas</strong> <strong>Copco</strong> and/or the carrier<br />
manufacturer prior to attachment.<br />
2) With medium-sized adapter<br />
3) With max oil flow<br />
U = With universal jaws<br />
S = With steel cutting jaws<br />
123<br />
rig-mounted<br />
cutterS
combi cutters<br />
1900-2550 kg<br />
Applications:<br />
• Cutting of masonry and reinforced concrete<br />
• Reduction of steel and reinforcements<br />
Features:<br />
• Short opening and closing times<br />
• 360° hydraulic rotation<br />
• Tandem cylinders<br />
• Replacable blades and teeth<br />
• Exchangeable jaws<br />
• Available with universal or steel cutting jaws<br />
• CAPS Coupling And Positioning System<br />
See also Parts and Services Catalogue:<br />
• Bolt cage<br />
• Lubricants<br />
• Maintenance kits<br />
Combi cutters CC 1700 U CC 1700 S<br />
Carrier weight class 1) t 15-25 15-25<br />
Service weight 2) kg 1900 1750<br />
Cutting force, upper blades, max. t 225 225<br />
Cutting force, jaw tip t - 79<br />
Crushing force, jaw tip t 57 -<br />
Oil flow rate l/min 150-250 150-250<br />
Operating pressure bar 350 350<br />
Closing cycle 3) s 1,6 1,6<br />
Opening cycle 3) s 1,7 1,7<br />
Oil flow, rotation, max. l/min 30 30<br />
Operating pressure, rotation, max. bar 210 210<br />
Jaw opening, max mm 740 370<br />
Jaw depth mm 615 430<br />
Blade length mm 350 380<br />
Part number 3363 0935 41 3363 0935 51<br />
Equipped with ContiLube II 3363 1042 01 3363 1042 51<br />
1) Weights apply to standard carriers only. Any variances must be agreed with <strong>Atlas</strong> <strong>Copco</strong><br />
and/or the carrier manufacturer prior to attachment.<br />
2) With medium-sized adapter<br />
3) With max oil flow<br />
124
U = With universal jaws<br />
S = With steel cutting jaws<br />
CC 2500 U CC 2500 S<br />
22-35 22-35<br />
2840 2550<br />
370 370<br />
- 130<br />
90 -<br />
150-250 150-250<br />
350 350<br />
2,9 2,9<br />
3,1 3,1<br />
30 30<br />
170 170<br />
860 400<br />
725 460<br />
350 380<br />
3363 0937 51 3363 0932 01<br />
125<br />
rig-mounted<br />
cutterS
combi cutters<br />
3480-6300 kg<br />
Applications:<br />
• Cutting of masonry and reinforced concrete<br />
• Reduction of steel and reinforcements<br />
Features:<br />
• Short opening and closing times<br />
• 360° hydraulic rotation<br />
• Tandem cylinders<br />
• Replacable blades and teeth<br />
• Exchangeable jaws<br />
• Available with universal or steel cutting jaws<br />
• CAPS Coupling And Positioning System<br />
See also Parts and Services Catalogue:<br />
• Bolt cage<br />
• Lubricants<br />
• Maintenance kits<br />
Combi cutters CC 3300 U CC 3300 S CC 3300 B<br />
Carrier weight class 1) t 30-50 30-50 38-55<br />
Service weight 2) kg 3480 3280 4400<br />
Cutting force, upper blades, max. t 510 510 510<br />
Cutting force, jaw tip t - 141 -<br />
Crushing force, jaw tip t 109 - 145<br />
Oil flow rate l/min 220-350 220-350 220-350<br />
Operating pressure bar 350 350 350<br />
Closing cycle 3) s 2,8 2,8 2,8<br />
Opening cycle 3) s 3,0 3,0 3,0<br />
Oil flow, rotation, max. l/min 30 30 30<br />
Operating pressure, rotation, max. bar 170 170 170<br />
Jaw opening, max mm 1000 440 570<br />
Jaw depth mm 765 625 660<br />
Blade length mm 525 525 705<br />
Part number 3363 0876 20 3363 0876 21 3363 1001 01<br />
1) Weights apply to standard carriers only. Any variances must be agreed with <strong>Atlas</strong> <strong>Copco</strong><br />
and/or the carrier manufacturer prior to attachment.<br />
2) With medium-sized adapter<br />
3) With max oil flow<br />
126
ig-mounted<br />
CC 4700 U CC 4700 S CC 6000 U CC 6000 S<br />
45-65 45-65 58-85 58-85<br />
4750 4500 6500 6300<br />
620 620 830 830<br />
- 198 - 205<br />
155 - 180 -<br />
350-450 350-450 450-550 450-550<br />
350 350 350 350<br />
3,2 3,2 4,0 4,0<br />
3,7 3,7 4,0 4,0<br />
50 50 50 50<br />
170 170 170 170<br />
1300<br />
1080<br />
525<br />
3363 0971 01<br />
710<br />
860<br />
875<br />
3363 0971 03<br />
1400<br />
1150<br />
525<br />
3363 0995 01<br />
750<br />
900<br />
875<br />
3363 0995 03<br />
U = With universal jaws<br />
S = With steel cutting jaws<br />
B = With box shape jaws<br />
127<br />
cutterS
demolition pulverizers<br />
Applications:<br />
• Primary demolition of reinforced concrete<br />
structures<br />
• Secondary reduction and separation<br />
Features:<br />
• 360° hydraulic rotation drive<br />
• Short opening and closing times<br />
• Replaceable blades, teeth and tooth plates<br />
See also Parts and Services Catalogue:<br />
• Lubricants<br />
• Maintenance kits<br />
Demolition pulverizers DP 2000 DP 2800<br />
Carrier weight class 1) t 18-27 25-35<br />
Service weight 2) kg 2070 2930<br />
Max. cutting force t 265 320<br />
Crushing force, jaw tip t 85 100<br />
Oil flow rate l/min 150-250 250-350<br />
Operating pressure bar 350 350<br />
Closing cycle 3) s 4 4<br />
Opening cycle 3) s 4 4<br />
Oil flow rate, rotation l/min 20-30 20-30<br />
Operating pressure, rotation bar 210 170<br />
Jaw width mm 460 480<br />
Jaw opening, max mm 780 965<br />
Jaw depth mm 650 930<br />
Blade length mm 190 350<br />
Demolition tooth plate 3363 0982 64 3363 0982 02<br />
Part number 3363 0974 01 3363 0925 01<br />
1) Weights apply to standard carriers only. Any variances must be agreed with <strong>Atlas</strong> <strong>Copco</strong><br />
and/or the carrier manufacturer prior to attachment.<br />
2) With medium-sized adapter<br />
3) With max oil flow<br />
128
Bulk pulverizers<br />
Applications:<br />
• Secondary reduction and separation<br />
• Secondary demolition of reinforced<br />
concrete structures<br />
• Separation of concrete and rebar<br />
Features:<br />
• Wide jaw<br />
• Short opening and closing times<br />
• 360° hydraulic rotation drive*<br />
See also Parts and Services Catalogue:<br />
• Lubricants<br />
• Maintenance kits<br />
*) Non-rotating versions are also available. Please<br />
contact your <strong>Atlas</strong> <strong>Copco</strong> sales representative<br />
for further information<br />
Bulk pulverizers BP 2100 BP 2900<br />
Carrier weight class 1) t 18-27 25-35<br />
Service weight 2) kg 2145 2930<br />
Max. cutting force t 240 362<br />
Crushing force, jaw tip t 80 114<br />
Oil flow rate l/min 150-250 250-350<br />
Operating pressure bar 350 350<br />
Closing cycle 3) s 4 4<br />
Opening cycle 3) rig-mounted<br />
s 4 4<br />
Oil flow rate, rotation l/min 35-50 35-50<br />
Operating pressure,<br />
rotation<br />
bar 170 170<br />
Jaw width mm 470 480<br />
Jaw opening, max mm 795 950<br />
Jaw depth<br />
Blade length<br />
Recycling tooth plate<br />
Part number<br />
mm<br />
mm<br />
800<br />
190<br />
3363 0989 65<br />
3363 0969 01<br />
870<br />
350<br />
3363 0989 66<br />
3363 0996 01<br />
1) Weights apply to standard carriers only. Any variances must be agreed with <strong>Atlas</strong> <strong>Copco</strong><br />
and/or the carrier manufacturer prior to attachment.<br />
2) With medium-sized adapter<br />
3) With max oil flow<br />
129<br />
cutterS
multi grapples<br />
Applications:<br />
• Demolition (masonry, wooden<br />
structures)<br />
• Sorting and loading<br />
Features:<br />
• 360° hydraulic rotary drive<br />
• Grapple and wear parts made of carbon steel<br />
• High grapple capacity<br />
• Replaceable blades<br />
See also Parts and Services Catalogue:<br />
• Lubricants<br />
• Maintenance kits<br />
Multi grapples MG 100 MG 200<br />
Carrier weight class 1) t 0,7-1 1-3<br />
Service weight 2) kg 90 175<br />
Max. closing force t 0,6 1,5<br />
Oil flow rate l/min 20-40 20-40<br />
Operating pressure bar 300 300<br />
Oil flow rate, rotation l/min 3-5 5-10<br />
Operating pressure, rotation bar 120-150 120-150<br />
Capacity l 30 70<br />
Jaw opening mm 600 750<br />
Grapple width mm 300 450<br />
Part number 3363 1036 50 3363 1036 51<br />
Multi grapples MG 1000 MG 1500<br />
Carrier weight class 1) t 12-20 17-28<br />
Service weight 2) kg 925 1480<br />
Max. closing force t 4,7 6,9<br />
Oil flow rate l/min 85-120 120-170<br />
Operating pressure bar 350 350<br />
Oil flow rate, rotation l/min 20-25 25-30<br />
Operating pressure, rotation bar 150-210 150-210<br />
Capacity l 500 800<br />
Jaw opening mm 1950 2100<br />
Grapple width mm 800 1000<br />
Part number 3363 0982 22 3363 0982 23<br />
1) Weights apply to standard carriers only. Any variances must be agreed with <strong>Atlas</strong> <strong>Copco</strong><br />
and/or the carrier manufacturer prior to attachment.<br />
2) With medium-sized adapter, without extra blades<br />
130
MG 300 MG 400 MG 500 MG 800<br />
2-5 4-8 5-9 9-16<br />
290 450 460 825<br />
2,0 2,3 2,4 3,8<br />
20-40 35-40 35-50 70-100<br />
300 300 300 350<br />
5-10 10-15 10-15 20-25<br />
120-150 120-150 120-150 150-210<br />
100 150 200 400<br />
1100 1400 1500 1700<br />
500 600 700 800<br />
3363 1036 52 3363 1036 53 3363 0982 20 3363 0982 21<br />
MG 1800 MG 2100 MG 2700 MG 5000<br />
20-28 25-35 28-50 50-80<br />
1780 2100 2710 5300<br />
6,9 8,5 9,2 13<br />
130-180 180-200 160-220 300-350<br />
350 350 350 350<br />
30-35 30-35 30-35 50-60<br />
150-210 150-210 150-210 210-250<br />
850 900 1000 1600<br />
2100 2200 2200 3000<br />
1200 1200 1200 1500<br />
3363 0982 24 3363 1036 54 3363 0982 25 3363 1036 55<br />
131<br />
rig-mounted<br />
cutterS
Your choice for minimized<br />
lifecycle cost<br />
<strong>Atlas</strong> <strong>Copco</strong> consumables and wear parts are the right<br />
choice when maximum output and low lifecycle cost are<br />
in focus of your daily work.<br />
All <strong>Atlas</strong> <strong>Copco</strong> Customer Centers and their network<br />
of distributors offer a wide range of wear parts and<br />
consumables. The staff is trained to support with advice<br />
and technical assistance to get the right parts for every<br />
application.<br />
Increased productivity<br />
Only genuine parts fit exactly to the stresses that an<br />
<strong>Atlas</strong> <strong>Copco</strong> product causes on it´s components. And only<br />
original parts enable the owner to minimize downtime<br />
and to protect the investment. Only a working machine<br />
can contribute to productivity of your company.<br />
Let it work!<br />
Low lifecycle cost<br />
Two thirds of the total cost of a machine is operating<br />
cost. The purchase price is only one third of the total<br />
lifecycle cost. Why not focusing on the more costly part<br />
when it comes to a purchase decision?<br />
For example: a smaller breaker on a smaller carrier with a<br />
clever maintenance concept and – of course – reliable and<br />
robust consumables: that´s the recipe for your success.<br />
132
parts and services<br />
Following pages represent our basic<br />
program of lubricants, accessories and<br />
consumables.<br />
For the full program and information<br />
please see our Parts and Services<br />
catalogue (Part number 3390 0650)<br />
133<br />
parts and<br />
services
Lubricants<br />
134<br />
Breaker and hammer AIR-OIL Part number<br />
0,25 l 8099 0202 40<br />
1 l 8099 0202 36<br />
5 l 8099 0202 02<br />
20 x 1 l 8099 0202 81<br />
4 x 5 l 8099 0202 85<br />
Rock Drill AIR-OIL Part number<br />
1 l 8099 0201 01<br />
4 l 8099 0201 04<br />
10 l 8099 0201 10<br />
208 l barrel 8099 0201 28<br />
12 x 1 l 8099 0201 81<br />
4 x 4 l 8099 0201 84<br />
Cobra & Compactor IMPACT-OIL Part number<br />
1 l 9234 0012 03<br />
20 x 1 l 9234 0014 05<br />
Power Pack BIO-OIL Part number<br />
4 l 3371 8077 51<br />
2-stroke OIL Part number<br />
1 l 8099 0202 40<br />
12 x 1 l 8099 0202 36<br />
Chisel paste Part number<br />
12 x 500 g 3363 0912 00<br />
15 kg 3362 2639 00
consumables for power trowels<br />
Floating discs<br />
Fits to trowel BG240 BG Combi<br />
BG370/<br />
BGCombi<br />
BG370/<br />
BGCombi<br />
BGCombi<br />
Diameter mm 610 865 945 945 1015<br />
Comment 3 mm thick<br />
Pcs/ pack 1 1 1 1 1<br />
Part number 4700 0330 81 4700 0323 97 4700 0319 37 4700 0330 36 4700 0324 73<br />
Floating blades<br />
Fits to trowel BG370 BG470<br />
Pcs/ pack 1 1<br />
Part number 4700 0326 59 4700 0117 58<br />
Trowel blades<br />
Fits to trowel BG240<br />
BG370 /<br />
BGCombi<br />
BG370 /<br />
BGCombi<br />
BG470<br />
Blade arm type<br />
Comment<br />
Bolt-on Quick-Release Bolt-on Bolt-on<br />
Pcs/ pack 4 4 1 1<br />
Part number 4700 0489 68 4700 0022 55 4700 0489 37 4700 0218 88<br />
accessories for power trowels<br />
Fits to trowel BGCombi BGCombi BG240 BG370/BG470<br />
Type Protection Ring Protection Ring<br />
Set of transport<br />
wheels<br />
Set of transport<br />
wheels<br />
Pcs/ pack 1 1 2 2<br />
Diameter mm 850 1020<br />
Part number 3382 0105 70 3382 0105 71 3382 0105 72 3382 0105 73<br />
135<br />
parts and<br />
services
accessories for handheld<br />
pneumatic equipment<br />
136<br />
X-LITE Hose rolls<br />
Inner<br />
diameter<br />
X-LITE customized hoses with individual<br />
text, package of 10 rolls (10 x 60 m)<br />
Colour<br />
Max. working<br />
pressure<br />
Inner<br />
diameter<br />
Length Part number<br />
mm bar m<br />
20 20 60 9030 2114 00<br />
25 20 60 9030 2106 00<br />
X-LITE Pre-mounted hoses<br />
Inner<br />
diameter<br />
Max. working<br />
pressure<br />
Length Part number<br />
mm bar m<br />
20 20 20 9030 2115 00<br />
25 20 20 9030 2111 00<br />
Max. working<br />
pressure<br />
Part number<br />
mm bar<br />
Yellow 20 20 9030 2114 90<br />
Red 20 20 9030 2114 95<br />
White 20 20 9030 2114 94<br />
Round rubber hoses, 30 m length<br />
Inner<br />
diameter<br />
Outer diameter mm Part number<br />
mm mm<br />
12,5 22 9030 2038 00<br />
20,0 30 9030 2040 00<br />
25,0 36 9030 2041 00<br />
Claw couplings<br />
Hose inner<br />
diameter<br />
Bore Weight Part number<br />
mm mm kg<br />
20 17,2 0,15 9000 0312 00<br />
25 22 0,17 9000 0313 00
VAM water separators<br />
Water<br />
separators<br />
Hose<br />
connection<br />
Air flow<br />
mm I/s<br />
1) US type also available. Please contact your <strong>Atlas</strong> <strong>Copco</strong> sales<br />
representative for further information.<br />
BLG/CLG lubricators<br />
Part number<br />
European type 1)<br />
VAM 01 20 50 8092 0110 58<br />
VAM 5A 25 120 8092 0110 82<br />
Max. working pressure 8 bar<br />
Lubricators<br />
CLG 10, for<br />
both mineral<br />
and synthetic<br />
oil<br />
CLG 30, for<br />
both mineral<br />
and synthetic<br />
oil<br />
Hose<br />
inner diameter<br />
Air<br />
flow<br />
Oil volume<br />
Weight<br />
mm l/s l kg<br />
Part number<br />
European type 1)<br />
25 8-15 1,3 3 8202 5101 23<br />
25 15-140 1,3 3 8202 5102 39<br />
BLG 30, for<br />
mineral oil<br />
25 15-140 1,3 3 8202 5102 05<br />
Max. working pressure 20 bar<br />
1) US type also available. Please contact your <strong>Atlas</strong> <strong>Copco</strong> sales<br />
representative for further information.<br />
137<br />
parts and<br />
services
accessories for handheld<br />
hydraulic equipment<br />
138<br />
Auger Length Part number<br />
Ø mm mm<br />
90 870 3378 0050 45<br />
150 870 3378 0050 46<br />
200 870 3378 0050 44<br />
250 870 3378 0050 47<br />
280 870 3378 0050 49<br />
350 870 3378 0050 48<br />
Extension rod Length Weight Part number<br />
mm kg<br />
Extension rod 500 5 3378 0050 55<br />
Hydraulic<br />
extension hose<br />
Oil flow<br />
divider<br />
Max. oil<br />
flow rate<br />
Coupling EHTMA class Part number<br />
7 m 1/2 " C/D 3371 8010 87<br />
12 m 1/2 " C/D 3371 8010 89<br />
Regulated oil<br />
flow rate<br />
EHTMA<br />
class<br />
Part number<br />
l/min l/min<br />
LFD 20 60 20-25 C 1801 1632 29<br />
LFD 30 120 25-38 D 1801 1642 32<br />
Post driver adaptors Part number<br />
Universal adaptor 3371 8060 33<br />
Round adaptor 96 mm 3371 8060 34<br />
Square adaptor 54 mm 3371 8060 32<br />
Lever kit for post puller Weight Part number<br />
LPP 10 HD lever kit 10 kg 3371 8101 48
Water kit for core drill and cut-off saw<br />
Size Water<br />
volume<br />
mm l kg<br />
Diamond discs<br />
Concrete and asphalt diamond discs for<br />
14 inch and 16 inch cut-off saw<br />
Description Blade size<br />
Arbor hole<br />
diameter<br />
Part number<br />
mm mm<br />
Concrete diamond disc 355 25,4 3378 0050 57<br />
Concrete diamond disc 405 25,4 3371 8097 27<br />
Asphalt diamond disc 355 25,4 3378 0050 58<br />
Asphalt diamond disc 405 25,4 3371 8097 26<br />
Diamond core bits<br />
Core bit size Length Part number<br />
mm mm<br />
Weight Part number<br />
220x620x250 10 8 3371 8090 02<br />
LSC Cart 1) for 14 and 16 inch cut-off saw<br />
Weight Part number<br />
25 kg 1809 0010 01<br />
1) including water kit<br />
Ø 62 450 3378 0050 61<br />
Ø 82 450 3378 0050 62<br />
Ø 102 450 3378 0050 63<br />
Ø 112 450 3378 0050 64<br />
Ø 132 450 3378 0050 65<br />
Ø 152 450 3378 0050 66<br />
Ø 162 450 3378 0050 67<br />
Ø 200 450 3378 0050 68<br />
139<br />
parts and<br />
services
accessories for hydraulic<br />
attachments<br />
140<br />
Chisel paste<br />
For hydraulic breakers<br />
Size Part number<br />
12 x 400 g 3363 0949 13<br />
12 x 500 g<br />
1) for use with ContiLube II<br />
1) 3363 0912 00<br />
15 kg 3362 2639 00<br />
45 kg 3362 2632 75<br />
High Performance Grease<br />
For hydraulic cutters, pulverizers<br />
and grapples<br />
Size Part number<br />
12 x 400 g 3363 0949 14<br />
Cobra & Compactor IMPACT-OIL<br />
For hydraulic compactors<br />
Size Part number<br />
1 l 9234 0012 03<br />
20 x 1 l 9234 0014 05<br />
Service boxes for hydraulic breakers<br />
Description Remarks Part number<br />
Service box No. I with nitrogen cylinder 2 l 3363 0898 44<br />
Service box No. II with nitrogen cylinder 5 l 3363 0898 45<br />
Service box No. III without nitrogen cylinder 3363 0949 40<br />
Bolt cage for hydraulic cutters<br />
The bolt cage allows cutter jaws to be<br />
replaced rapidly. It simplifies handling on<br />
site and shortens change-over times.<br />
CC combi cutters Part number<br />
CC 1700 U / CC 1700 S 3363 0946 47<br />
CC 2500 U / CC 2500 S 3363 0945 42<br />
CC 3300 U / CC 3300 S 3363 0946 48
atlas copco 1+2 program:<br />
extended warranty for hydraulic<br />
breakers<br />
For hydraulic breakers, two years additional warranty are<br />
provided free of charge. The pre requisite for a warranty<br />
extension is that you register your breaker on the internet<br />
within 4 weeks of initial start-up. The warranty period<br />
begins on the date of purchase.<br />
Features:<br />
• Three years warranty period<br />
• Unlimited operating hours<br />
• Extension period covers the warranty risk<br />
• Covers main components, including the piston<br />
Benefits:<br />
• Protected investment and peace of mind – free of<br />
charge<br />
• Time to focus on your business<br />
• Improved breaker availability<br />
• Higher resale value<br />
Register at www.1plus2program.com<br />
Basic warranty<br />
12 months<br />
24 months<br />
“Standard Warranty” ”Standard scope of Warranty”<br />
36 months<br />
Maintenance according to the operating instructions,<br />
at least one inspection per 12 months or not later than<br />
after each 500 operating hours – whatever is earlier.<br />
141<br />
parts and<br />
services
Metric/U.S. Conversion Table<br />
To convert from Into Multiply by<br />
acres sq meters 4,047<br />
bar pounds/sq in 14,504<br />
Celsius (°C) Fahrenheit (°C x 9/5) + 32<br />
centimeters inches 0,3937<br />
cubic centimeters cu inches 0,06102<br />
cubic feet cu meters 0,02832<br />
cubic feet liters 28,32<br />
cubic ft/min cu meter/min 0,02831<br />
cubic inches cu centimeters 16,3872<br />
cubic meters cu feet 35,31<br />
cubic meters cu yards 1,308<br />
cubic yards cu meters 0,7646<br />
cubic yards liters 764,6<br />
feet meters 0,3048<br />
feet millimeters 304,8<br />
feet/min meters/min 0,3048<br />
Fahrenheit (°F) Celsius (°F-32) x 5/9<br />
gallons (U.S.) liters 3,785<br />
gallons/min liters/sec 0,063<br />
Hertz vibrations/min 60<br />
horsepower, metric horsepower 0,9863<br />
horsepower horsepower, metric 1,014<br />
inches centimeters 2,54<br />
inches millimeters 25,4<br />
kilograms pounds 2,205<br />
kilograms tons (long) 0,0011023<br />
kilograms tons (short) 0,0009842<br />
kilograms (force) Newtons 9,807<br />
kilograms/cm pounds/in 5,60<br />
kilograms/cu.m lb/cu ft 0,0624<br />
kilograms/cu.m lb/cu yd 1,6856<br />
kilograms/sq cm lb/sq in 14,22<br />
kilograms/sq m lb/sq ft 0,02048<br />
kilometers miles 0,6214<br />
kilometers/hr miles/hr 0,6214<br />
kilometers feet 3,209<br />
kilopascals (kPa) pounds/sq in 0,145<br />
kpm lb ft 7,233<br />
liters cu ft 0,035<br />
liters gal (U.S. liq) 0,264<br />
liters qts (U.S. liq) 1,057<br />
Megapascals (MPa) pounds/sq in 145,04<br />
meters feet 3,281<br />
meters inches 39,37<br />
142
To convert from Into Multiply by<br />
meters miles (statute) 0,0006214<br />
meters yards 1,094<br />
meters/min feet/min 3,281<br />
miles (statute) kilometers 1,609<br />
miles (statute) meters 1,609<br />
miles/hr kms/hr 1,609<br />
millimeters inches 0,03937<br />
millimeters feet 0,0033<br />
Newtons pounds (force) 0,225<br />
Newtons kilograms (force) 0,102<br />
Newton meters (Nm) pounds-inches 8,8507<br />
Newton meters (Nm) pound-feet 0,7376<br />
pints (liq) liters 0,473<br />
pounds kilograms 0,4536<br />
pound-feet KPM 0,1383<br />
pound-feet Newton meters (Nm) 1,3556<br />
pounds (force) Newtons 4,448<br />
pound-inches Newton meters (Nm) 0,1130<br />
pounds/in kilograms/cm 0,1786<br />
pounds/cu yd kg/cu meter 0,55955<br />
pounds/sq in bar 0,06895<br />
pounds/sq in kg/sq cm 0,0703<br />
pounds/sq in kilopascals (kPa) 6,895<br />
pounds/sq in megapascals (MPa) 0,006895<br />
quarts (liq) liters 0,9463<br />
rod meters 5,029<br />
sq centimeters sq inches 0,155<br />
sq feet sq meters 0,0929<br />
sq feet sq yards 0,1111<br />
sq inches sq cms 6,452<br />
sq kilometers sq miles 0,3861<br />
sq meters sq feet 10,76<br />
sq meters sq yards 1,196<br />
sq miles sq kms 2,59<br />
sq millimeters sq inches 0,00155<br />
sq yds sq meters 0,8361<br />
Temperature Celsius (°C) (°F-32) x 5/9<br />
tons (long) tons (short) 1,016<br />
tons (metric) kilograms 1,000<br />
tons (metric) pounds 2,205<br />
tons (short) kilograms 907,18<br />
tons (short) tons (metric) 0,9078<br />
vibrations/min Hertz 0,0167<br />
yards meters 0,9144<br />
143
Use only authorized parts. Any damage or malfunction<br />
caused by the use of unauthorized parts is not covered by<br />
Warranty or Product Liability<br />
Subject to technical modifications.<br />
© 2011 <strong>Atlas</strong> <strong>Copco</strong> <strong>Construction</strong> <strong>Tools</strong> AB, Stockholm, Sweden.<br />
9800 1251 01<br />
www.atlascopco.com