How to Make an Origami Yoda (Yoda & Baby Yoda)

Co-authored by Lois Wade and Hannah Madden

Last Updated: August 26, 2022 Fact Checked

Want a Star Wars themed decoration and a chance to flex your crafting skills at the same time? Making an origami Yoda is the perfect activity for you! You can choose from classic Yoda from the old Star Wars, or go for baby Yoda (Grogu) from the new ones. Either way, you’re bound to have a ton of fun making this recognizable and loveable character.

Method 1

Method 1 of 3:

Original Origami Yoda

Download Article

1
Fold the top of a 7 by 5 in (18 by 13 cm) piece of paper downward. Start with a 7 by 5 in (18 by 13 cm) piece of paper in green. Lay the paper down so that the 7 inch (17.8 cm) side is vertical and the 5 inch (12.7 cm) side is horizontal. Fold the paper down 4.5 inches (11 cm) from the bottom.^{[1]
X
Research source}
- If your paper has 2 colors (one on the front one on the back), start with the robe color (brown) facing up.
- Since 7 by 5 in (18 by 13 cm) isn’t a standard size for origami paper, buy a larger size and cut it yourself using a ruler.
2
Create a double pleat on the folded part of your paper. This double pleat will become Yoda's eyes. To make it, draw a small line about .25 inches (0.6 cm) down from the top of the fold. Make another fold along that line to create a pleat in the paper. Then, flip the paper over again and do it once more to create a zig zag line.^{[2]
X
Research source}
- A pleat is made by making two folds close together, kind of in a zig zag pattern.
Advertisement
Begin the pleat about 1 inch (2.5 cm) up from the bottom of the paper (not just the folded part). Fold the paper up about 1 in (2.5 cm), then flip the paper over. Make a second fold directly on top of that fold to create a double pleat on the bottom of the paper.^{[3]
X
Research source}
Grab the top 2 corners of your paper and fold them over to create a triangle that has a straight edge on the inside. Then, unfold them and tuck them back into the folds you made already. These folds will become Yoda’s ears!^{[4]
X
Research source}
Flip your paper over so the colored part faces upward. Fold the bottom half of the right and left side inward so they meet in the middle to create Yoda’s body.^{[5]
X
Research source}
Find the corners that you tucked inside those pleats you made earlier. Unfold them so that they're sticking out, like Yoda’s ears do.^{[6]
X
Research source}
Find the crease that separates the top fold from the rest of the paper. Gently fold the paper so that the double crease you made earlier is on top of the creases you made on the lower part of the paper.^{[7]
X
Research source}
8
Pull at the pleats to create Yoda’s face. If you want, you can sculpt Yoda's expression by pulling at the eye and mouth pleats. You can even make Yoda's ears pointier and more wrinkled by pulling at them and crinkling the paper.^{[8]
X
Research source} Enjoy your origami Yoda!
- To create a lightsaber for your Yoda to hold, grab a second sheet of origami paper and make a zig zag fold over the entire thing. Crease your folds well so the lightsaber holds its shape, then tuck it into Yoda’s arms.

Method 2

Method 2 of 3:

Origami Baby Yoda

Download Article

Baby Yoda is a little bit smaller than original Yoda, so pick a paper that’s only 6 in (15 cm) on all sides. Go for green-colored origami paper, and flip it over so the non-colored side faces up.^{[9]
X
Research source}
Grab the bottom of the paper and fold upwards, meeting the top half of the paper. Press down on the fold to make a sharp crease, then unfold the paper.^{[10]
X
Research source}
Keeping the white side of the paper up, fold the paper in half the other way (not the way you folded it before). Press down on the fold to make a sharp crease in the paper.^{[11]
X
Research source}
Unfold your paper and spread it flat on a table. Grab 1 corner and fold it over to its opposite corner, making a triangle shape. Press down on the fold to make a sharp crease. Unfold the paper again and make a second triangle fold, this time using the opposite corners. Press down on the fold to make a sharp crease and unfold your paper one last time.^{[12]
X
Research source}
Now that you have all of your creases, pick up your piece of paper, green side up. Hold your fingers in a pinching motion, then slowly push the paper in toward itself. Fold the front and back pieces of your paper to create 1 triangle shape.^{[13]
X
Research source}
6
Bend the right and left corners inward. Set your triangle shape down on a table, then grab the bottom right corner. Fold the corner inward so it touches the middle of the triangle, then do the same with the left corner.^{[14]
X
Research source}
- Only make these folds on one side of the paper, not the other. Your paper will look like 1 folded triangle on top of an unfolded triangle at this point.
Flip your paper over and grab 1 of the triangle points, then fold it upwards to create a triangle with a straight line on the outside. Do the same thing to the other side to give baby Yoda his signature large ears.^{[15]
X
Research source}
8
Bend the top point downward to finish baby Yoda’s head. Grab the very top of your paper that’s still in a sharp point. Fold it downward about 1 in (2.5 cm) to give baby Yoda a flat head.^{[16]
X
Research source} Now you’ve finished his head!
- If you’d like to, you can draw on eyes and a mouth using a permanent marker.

Method 3

Method 3 of 3:

Finger Puppet Yoda

Download Article

1
Fold the paper down about 1 in (2.5 cm). Use a 7 by 5 in (18 by 13 cm) piece of green origami paper. Start with the “robe” side, or the non-colored side, facing up.^{[17]
X
Research source}
- It's best to use origami paper that is green on one side and brown on the other. You can get this at any craft store.
You want to fold them so that their edges line up with the edge of the green line. Make a crease, then unfold them.^{[18]
X
Research source}
Using the creases you made in previously as guidelines, tuck the corners in between the two sides of the paper. This will create two flaps, which will later become the ears.^{[19]
X
Research source}
When your fold is done, there will be about 1 in (2.5 cm) of brown showing on top of the green.^{[20]
X
Research source}
You're undoing the step where you folded the bottom up 1 in (2.5 cm). Fold it back down to make a new crease that is different from that fold. This will make a zig zag shape on the paper.^{[21]
X
Research source}
Fold the paper up so that the bottom edge almost touches the top edge. Crease it well with your fingers.^{[22]
X
Research source}
Fold the paper down just above the crease left over from the previous step. This will make another zig zag crease in the paper.^{[23]
X
Research source}
Grab the left side of your paper and fold it over, leaving a triangle slice behind. Crease it so it stays, then do the same thing with the right side.^{[24]
X
Research source}
Find the triangle flaps of paper in the center. Fold them so that they stick out. Turn the paper back over and then you’re done! Feel free to draw on a face or round out his head to make him more realistic.^{[25]
X
Research source}