What Causes Pink Mold & How to Get Rid of It

How To Clean Pink Mold

1. Mix a Cleaning Solution

   In a small bowl, mix 1/2 cup of baking soda with 1 tablespoon of dishwashing liquid or an all-purpose cleaner.

   The paste will be runny. Depending on how much area you need to clean, you might need to make a double batch.

2. Put on Protective Gear

   Wear rubber gloves, protective eyewear, and a mask to protect yourself from exposure to the bacteria. If you have open sores, they should be covered as well.

3. Remove the Shower Curtain and Liner

   Clean the shower curtain and liner, even if you can't see any pink growth on the surfaces. This bacteria can grow on plastic and fabric surfaces.

   Toss washable curtains and liners in the washing machine, and wash in warm to hot water with your regular laundry detergent.

   Dry fabric curtains by following the care label instructions but plastic liners should never be placed in an automatic dryer.

   Hang the liner from an outdoor clothesline or drying rack instead.

   Replace plastic shower curtains and liners for bad pink mold problems.

4. Scrub Away the Bacteria

   Dip a nylon-bristle scrub brush in the baking soda solution, and start scrubbing.

   Start at the highest point of the growth, and work your way down the surfaces.

   Baking soda is a great cleaner because it provides a gentle abrasive to help loosen the bacteria from the surfaces.

5. Rinse the Area

   Rinse away the baking soda and bacteria with a hand-held shower spray or by dipping a towel in water to wipe down the walls and hard surfaces.

6. Prepare the Disinfectant Solution

   Since bacteria can be difficult to kill, the area will need to be treated with a disinfectant solution to be sure the bacteria is dead. In a spray bottle, mix a 50/50 solution of warm water and chlorine bleach.

   Warning

   Never mix bleach with other cleaners, such as vinegar or ammonia, when cleaning pink mold or any other time.

7. Disinfect the Infested Area, Wait, and Scrub Again

   Spray the freshly cleaned area liberally with the bleach and water solution. Allow the solution to work for 10 to 15 minutes. This length of exposure should kill any lingering bacteria and remove any stains that remain on the surfaces.

   Use a clean scrub brush to go over the surfaces one more time.

8. Rinse and Dry the Surfaces

   Rinse the surfaces well to remove the bleach solution. Dry with a squeegee or towels to remove moisture and prevent streaks.

9. Hang the Shower Curtain

   Hang the freshly washed and dried shower curtain and liner.

Tips to Prevent the Growth of Pink Mold

• Encourage hand-washing, especially after using the bathroom, to prevent the transfer of Serratia marcescens bacteria to other surfaces.
• Keep surfaces dry. Since pink mold needs moisture to thrive and spread, take the time to dry the shower walls after each use. A squeegee can do the job in just seconds, or you can use a towel.
• Close and straighten shower curtains so they will dry more quickly. Wash the curtains and liners at least monthly.
• Clean away soap scum at least weekly. Soap scum contains body oil that serves as food for mold and bacterial growth.
• Wipe away spills and drops of liquid soap, shampoo, and conditioner from the walls and floor of the shower or tub after each use.
• Reduce the humidity level in your home by turning on exhaust fans, using dehumidifiers, and repairing leaky plumbing.

When to Call a Professional

It's almost always a fairly simple task to remove pink mold on your own, although it can require some persistence and elbow grease.

However, should your bathroom also have signs of black mold (Stachybotrys chartarum) growing along the walls, near the floors, or underneath the sink, then it's time to call a professional mold remediation company.

These professionals have the knowledge and equipment to safely deal with more serious mold growth.