No. 79940481

Sold
Sony - TC-D5M + F-510 Audio-cassette deck
Final bid
€ 454
11 weeks ago

Sony - TC-D5M + F-510 Audio-cassette deck

Very nice Sony professional portable recording device. Sounds very good, like a high end deck. With automatic limiter. All belts are renewed. New idler rubbers. Motor oiled. Record and plays very good. Spins fast also in both ways. Heads cleaned and demagnetized Speed set correct. Little signs of use, but still very good overall. Works on 2 batteries also. Light work in VU meters Including power supply. The TC-D5 was the machine that while clearly not being a personal stereo cassette player in the accepted sense of the term contributed immensely to the development of the Walkman idea and the Walkman range. Launched in 1978, it immediately became a favourite of senior people in the Sony company as a source of high quality portable music, despite the lack of suitable lightweight headphones, its large size and its high price. This provided the idea for a cheaper, smaller version that could be sold cheaply enough to become widely popular. The TC-D5 was not the first Sony portable stereo cassette recorder, there had been many models aimed at both the amateur and the professional user, though they had all been fairly large and heavy, similar in both size and scale to the domestic cassette decks of the period. They were typically based around the mechanicals of the larger machines and had included mains power units and full-sized loudspeakers, all factors not conducive to small size and low weight. The TC-D5 was different to these models and the design was clearly focused on portability. It operated on batteries only, had only a small monitor loudspeaker and most importantly, used a mechanism specially developed for small machines. However, the TC-D5 was first and foremost a high quality product, and none of these factors were allowed to detract from this. The signal processing circuits required a higher voltage than the two D sized batteries allowed, so a DC-DC converter was employed to step up the 3V to 12V, enough to power high-grade amplifiers and the excellent limiter and Dolby B processor that the machine included. Of particular note, and most important, were the microphone amplifiers, which offered low noise and a wide dynamic range, making the TC-D5 the perfect choice for outdoor recording, news gathering and other such tasks. Also of interest was the head which was made of ferrite. This material not only has excellent electrical properties, it is also very hard and resistant to wear, reducing the need for frequent readjustment. The best electronics in the world would have been wasted if the mechanical sections of the machine had not been of equal quality. A big problem with any portable machine is that of wow and flutter, random tape speed changes that slur the sound and lend it a diffuse, wavering quality. Large, stationary recorders can be fitted with large flywheels and powerful motors to minimise these effects, but in portables this is not only impractical due to the size and power constraints, it also is counter productive as large rotating masses become unstable when the machine is moved or carried. To avoid these problems, the TC-D5 used the disc drive principle. The capstan flywheel was small and driven at its edge by a motor whose axis was at 90 degrees to that of the capstan spindle. The capstan was fitted a bevelled rubber tyre and the motor had a cone-shaped extension to its shaft to match. The two were held in contact by light spring pressure, which also held the capstan securely in its lower bearing. A pickup coil inside the flywheel bearing measured the speed that the capstan rotated at and this information was used to regulate the speed of the motor. The electronics could respond quickly, and this, combined with the low and well-damped rotating mass, effectively made the tape speed absolutely stable and unaffected by movement, tape friction, temperature and battery voltage. Type: Cassette Recorder Tape Type: type I, FeCr, CrO2, Metal Noise Reduction: B Output: 20mW (headphones), 0.435V (line) Battery: 2 x D Power Supply: 6V DC Dimensions: 237 x 48 x 168mm Weight: 1700g Year: 1980 Including Sony mono microphone Carefully shipped

No. 79940481

Sold
Sony - TC-D5M + F-510 Audio-cassette deck

Sony - TC-D5M + F-510 Audio-cassette deck

Very nice Sony professional portable recording device.
Sounds very good, like a high end deck.
With automatic limiter.
All belts are renewed.
New idler rubbers.
Motor oiled.
Record and plays very good. Spins fast also in both ways.
Heads cleaned and demagnetized
Speed set correct.
Little signs of use, but still very good overall.
Works on 2 batteries also.
Light work in VU meters

Including power supply.

The TC-D5 was the machine that while clearly not being a personal stereo cassette player in the accepted sense of the term contributed immensely to the development of the Walkman idea and the Walkman range. Launched in 1978, it immediately became a favourite of senior people in the Sony company as a source of high quality portable music, despite the lack of suitable lightweight headphones, its large size and its high price. This provided the idea for a cheaper, smaller version that could be sold cheaply enough to become widely popular.
The TC-D5 was not the first Sony portable stereo cassette recorder, there had been many models aimed at both the amateur and the professional user, though they had all been fairly large and heavy, similar in both size and scale to the domestic cassette decks of the period. They were typically based around the mechanicals of the larger machines and had included mains power units and full-sized loudspeakers, all factors not conducive to small size and low weight.

The TC-D5 was different to these models and the design was clearly focused on portability. It operated on batteries only, had only a small monitor loudspeaker and most importantly, used a mechanism specially developed for small machines. However, the TC-D5 was first and foremost a high quality product, and none of these factors were allowed to detract from this. The signal processing circuits required a higher voltage than the two D sized batteries allowed, so a DC-DC converter was employed to step up the 3V to 12V, enough to power high-grade amplifiers and the excellent limiter and Dolby B processor that the machine included. Of particular note, and most important, were the microphone amplifiers, which offered low noise and a wide dynamic range, making the TC-D5 the perfect choice for outdoor recording, news gathering and other such tasks. Also of interest was the head which was made of ferrite. This material not only has excellent electrical properties, it is also very hard and resistant to wear, reducing the need for frequent readjustment.

The best electronics in the world would have been wasted if the mechanical sections of the machine had not been of equal quality. A big problem with any portable machine is that of wow and flutter, random tape speed changes that slur the sound and lend it a diffuse, wavering quality. Large, stationary recorders can be fitted with large flywheels and powerful motors to minimise these effects, but in portables this is not only impractical due to the size and power constraints, it also is counter productive as large rotating masses become unstable when the machine is moved or carried.

To avoid these problems, the TC-D5 used the disc drive principle. The capstan flywheel was small and driven at its edge by a motor whose axis was at 90 degrees to that of the capstan spindle. The capstan was fitted a bevelled rubber tyre and the motor had a cone-shaped extension to its shaft to match. The two were held in contact by light spring pressure, which also held the capstan securely in its lower bearing. A pickup coil inside the flywheel bearing measured the speed that the capstan rotated at and this information was used to regulate the speed of the motor. The electronics could respond quickly, and this, combined with the low and well-damped rotating mass, effectively made the tape speed absolutely stable and unaffected by movement, tape friction, temperature and battery voltage.

Type: Cassette Recorder
Tape Type: type I, FeCr, CrO2, Metal
Noise Reduction: B
Output: 20mW (headphones), 0.435V (line)
Battery: 2 x D
Power Supply: 6V DC
Dimensions: 237 x 48 x 168mm
Weight: 1700g
Year: 1980

Including Sony mono microphone

Carefully shipped


Set a search alert
Set a search alert to get notified when new matches are available.

This object was featured in

                                        
                                                                                                    
                    
                                        
                                                                                                    
                    
                                        
                                                                                                    
                    

How to buy on Catawiki

Learn more about our Buyer Protection

      1. Discover something special

      Browse through thousands of special objects selected by experts. View the photos, details and estimated value of each special object. 

      2. Place the top bid

      Find something you love and place the top bid. You can follow the auction to the end or let our system do the bidding for you. All you have to do is set a bid for the maximum amount you want to pay. 

      3. Make a secure payment

      Pay for your special object and we’ll keep your payment secure until it arrives safe and sound. We use a trusted payment system to handle all transactions. 

Have something similar to sell?

Whether you're new to online auctions or sell professionally, we can help you earn more for your special objects.

Sell your object