Add an Accessory:
3M Inline Resin Power Cable Splice Kit 82-AN, 10-2 AWG, UL Listed, Permanent Watertight Seal, Designed for Weather Exposed or Direct Burial Locations, 1 Kit
Purchase options and add-ons
Brand | 3M |
Material | Resin |
Gauge | 2.0 |
Voltage | 600 Volts |
About this item
- INSULATES AND SEALS: Unshielded, single conductor cables and multiple conductor cables
- ENGINEERED VERSATILITY: Make inline splices on 5 kV cables and multiple conductor cables through 1 kV
- SPLICE AND RE-JACKET: Designed to splice or re-jacket non-shielded portable power cables and portable cords
- DESIGNED FOR THE ELEMENTS: Designed for weather-exposed or direct burial locations
- FAST AND EASY: Permanent watertight protection for submerged applications up to 600 V and 90C
- QUICK CURE TIME: Cures in about 1-2 hours (pending temperature/conditions)
- NO HEAT OR TOOLS: Kit includes a mold body, pouring spouts, 23 electrical tape and No. 4N resin
- UL LISTED: For use with UL listed connectors only
Frequently bought together
Similar items that may ship from close to you
- NSI ESGS-4/0 Easy-Splice in-Line Gel Splice Kit with Connector, 2-4/0 AWG Wire RangeAmazon's Choicein Butt Terminals
Product details
- Package Dimensions : 9.69 x 6.26 x 2.72 inches; 8.96 ounces
- Item model number : 82-AN
- Date First Available : May 20, 2021
- Manufacturer : 3M
- ASIN : B095FJM1FB
- Best Sellers Rank: #54,604 in Industrial & Scientific (See Top 100 in Industrial & Scientific)
- #399 in Butt Terminals
- Customer Reviews:
Product Description
3M Scotchcast Inline Resin Power Cable Splice Kit 82-AN is designed to insulate and seal 5kV rated unshielded, single conductor cables and 1kV rated multiple conductor cables. Quickly and easily insulate and create a permanent watertight seal for use in weather-exposed or direct-burial locations without the need for heat or additional tools. Designed to not melt or run once cured and stable at elevated temperatures. Two-part closed mixing pouch simplifies mixing and pouring, generating its own heat to cure. Includes a mold body, pouring spouts, 23 electrical tape and No. 4N resin. UL listed for direct burial and submerged applications up to 600 V and 90C. For use with UL listed connectors only.
Important information
Legal Disclaimer
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
From the brand
From the manufacturer
|
|
|
---|---|---|
RELIABLEPermanent watertight protection for submerged applications. |
ALL-WEATHER APPLICATIONSDesigned for weather-exposed or direct burial locations. |
CURING TIMECures in about 1-2 hours (temperature dependent). |
|
|
|
|
---|---|---|---|
INSTALLATIONInstall End Caps. Trim conical ends of end caps at proper guide marks to provide a firm sliding fit on cable sheath. Slip end caps onto each cable. Install Mold Body. Slip mold |
CONNECTIONJoin conductors with compression-type connectors. Follow connector manufacturer's instructions. Multi-conductor Cables. Stagger individual connectors (provide lateral spacing of 1/2 in between ends of connectors) and insulate connector with Scotch Rubber Electrical Tape 23. For 600 volts or less, use 3M Scotchlok Insulated Butt Connectors. Note: Connectors not provided with kit. |
ASSEMBLE MOLD BODYAssemble end caps onto mold body. Center mold body over splice with pour spouts in upright position. Important: Cables and connector must be centered in mold. |
POUR SPLICE*Use the product with safety gloves. Position splice level. Mix resin thoroughly per instructions on resin package. Pour resin immediately after mixing. Fill mold through one spout with both spouts are completely filled. When resin has solidified and cooled, splice may be put into service. |
3M Scotchcast Inline Resin Power Cable Splice Kits 82-AN Series | 3M Scotchcast Inline Resin Power Cable Splice Kit 82-A1N | 3M Scotchcast Inline Resin Power Cable Splice Kit 82-A2N | 3M Scotchcast Inline Resin Splice Kit 82-A3N | |
---|---|---|---|---|
Customer Reviews |
3.6 out of 5 stars
8
|
3.6 out of 5 stars
8
|
5.0 out of 5 stars
2
|
3.6 out of 5 stars
8
|
Price | $73.03$73.03 | $63.12$63.12 | $87.89$87.89 | — |
Conductor Sizes | 10-2 AWG | 8-2 AWG | 2-3/0 AWG | 3/0 AWG - 400 kcmil |
Insulation Outside Diameter Range | 0.406 - 0.60 Inch | 0.406 - 0.60 Inch | 0.625 - 1.00 Inch | 1 - 1.56 Inch |
No Heat or Tools Required | ✓ | ✓ | ✓ | ✓ |
What's in the box
Looking for specific info?
Customer reviews
Customer Reviews, including Product Star Ratings help customers to learn more about the product and decide whether it is the right product for them.
To calculate the overall star rating and percentage breakdown by star, we don’t use a simple average. Instead, our system considers things like how recent a review is and if the reviewer bought the item on Amazon. It also analyzed reviews to verify trustworthiness.
Learn more how customers reviews work on Amazon-
Top reviews